CNC Zone

From MakerFX Wiki!
Revision as of 18:14, 26 April 2019 by Jeff (talk | contribs)
Jump to: navigation, search
edit 

REMEMBER To Reserve Time!

Various tools such as the lasers (Epilog or Audrey), 3D Printers, and Forest CNC need to be reserved before using the tool. Review the Slack channel for the tool to reserve time.

General Policies for the CNC Zone

The use of the X-Carve CNC machine at MakerFX is limited to only those individuals who:

  1. Have attended a training class
  2. Been certified to use the machine
  3. Take the necessary safety precautions such as wearing close toed shoes, safety glasses and snug fitting clothing.

This machine can be dangerous if used improperly resulting in serious bodily injury or damage to the machine. Minors are prohibited from using the X-Carve CNC without the supervision of a trained and certified MakerFX member.

Step 1: Design

Step 2: Create G-Code

Step 3: Operate the X-Carve

VCarveProExample.png
XCarveSelectToolpaths.png
Xcarve machine.jpg

Go to the Main Page