Difference between revisions of "Dewalt 20 inch Scroll Saw"

From MakerFX Wiki!
Jump to: navigation, search
(Information)
Line 1: Line 1:
 
Location:  Wood Zone  [[File:Dewalt 20 inch Scroll Saw.jpeg|200px|thumb|Right|Dewalt 20" Scroll Saw]]
 
Location:  Wood Zone  [[File:Dewalt 20 inch Scroll Saw.jpeg|200px|thumb|Right|Dewalt 20" Scroll Saw]]
 +
 +
The DW788 20" Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes. Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm provide for easy adjustment. Oversized, cast-iron table provides excellent material support and has the ability to bevel to both the left and right. Pin end scroll saw blades cannot be used with the DW788. It was only accept plain end scroll saw blades
  
 
=Policies for the Dewalt 20" Scroll Saw=
 
=Policies for the Dewalt 20" Scroll Saw=
Line 22: Line 24:
  
 
=Routine Maintenance=
 
=Routine Maintenance=
 
+
To lube the tension lever,you will need to remove the 4 screws that hold the black control cover and then remove the screw that holds the tension lever down. Grease can be placed on the bottom side of the lever. The DW788 uses sealed bearings that do not require additional lubrication. Use a good quality paste wax to buff the table in order to prevent rust.
 
----
 
----
 
[[Wood Zone|Go to the Wood Zone]]
 
[[Wood Zone|Go to the Wood Zone]]
  
 
[[Dead Links|Report Dead Links Here]]
 
[[Dead Links|Report Dead Links Here]]

Revision as of 11:45, 17 June 2017

Location: Wood Zone

Dewalt 20" Scroll Saw

The DW788 20" Variable-Speed Scroll Saw operates quietly and smoothly for accuracy. The tool-free blade clamp allows for quick and easy blade changes. Convenient placement on the liftable arm of the dust blower, power switch, and saw adjustments on the front of the upper arm provide for easy adjustment. Oversized, cast-iron table provides excellent material support and has the ability to bevel to both the left and right. Pin end scroll saw blades cannot be used with the DW788. It was only accept plain end scroll saw blades

Policies for the Dewalt 20" Scroll Saw

Information

Speed Setting  Strokes Per Minute
    0                 400 
    1                 600 
    2                 800 
    3                 950 
    4                1100 
    5                1300 
    6                1450 
    7                1600 
    8                1750

Videos

Accessories

Consumables

Routine Maintenance

To lube the tension lever,you will need to remove the 4 screws that hold the black control cover and then remove the screw that holds the tension lever down. Grease can be placed on the bottom side of the lever. The DW788 uses sealed bearings that do not require additional lubrication. Use a good quality paste wax to buff the table in order to prevent rust.


Go to the Wood Zone

Report Dead Links Here