Dewalt 20 inch Scroll Saw Maintenance Log

From MakerFX Wiki!
Revision as of 11:53, 24 July 2017 by Steve (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
  • 06/16/17, Troubleshot non functioning saw. Discovered the fuse holder insert was pushed in too far. Reset insert to proper position. Functional check good.
  • 06/29/17, Replaced broken black plastic switch/potentiometer cover. Functional check good.
  • 07/01/17, Lubed tension lever IAW "Dewalt Instruction Manual". Used blue Locktite to secure tension knob bolt. Functional check good.
  • 07/14/17, Waxed cast iron table