Difference between revisions of "Downloading and installing instructions for V-Carve Makerspace Edition"

From MakerFX Wiki!
Jump to: navigation, search
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The VCarve Makerspace Edition will only work with the MakerFX X-Carve CNC Router
+
The VCarve Makerspace Edition will only work with the MakerFX CNC routers: [[Forest_RMF_CNC_Router | Forest CNC]].
  
 
Go to the [http://www.vectric.com/products/vcarve/trial.html VCarve download page] and click on the green VCarve Pro Download Trial Software button.  Follow the instruction for installing the software.
 
Go to the [http://www.vectric.com/products/vcarve/trial.html VCarve download page] and click on the green VCarve Pro Download Trial Software button.  Follow the instruction for installing the software.
  
The MakerFX makerspace ID is 58DD9-50708-F5791-20154-7E971-8FDCE-DAD79.  Highlight and copy this ID to the clipboard.  Open
+
VCarve Pro only supports Windows operating systems.  So if you are a Mac user you will need to run Windows as a VM to use this software on a personal device.
 +
 
 +
Start VCarve Pro.  Select Help -> About VCarve Pro -> Enter Makerspace ID.
 +
 
 +
The MakerFX makerspace ID is '''located in the #mfx-cnc channel as a pinned post'''.  Highlight and copy the ID to the clipboard.  Ctrl-V to paste the ID into the dialog box.
 +
 
 +
Restart VCarve Pro.  Confirm you are using the Makerspace license by checking the Help About menu.

Revision as of 21:14, 21 December 2021

The VCarve Makerspace Edition will only work with the MakerFX CNC routers: Forest CNC.

Go to the VCarve download page and click on the green VCarve Pro Download Trial Software button. Follow the instruction for installing the software.

VCarve Pro only supports Windows operating systems. So if you are a Mac user you will need to run Windows as a VM to use this software on a personal device.

Start VCarve Pro. Select Help -> About VCarve Pro -> Enter Makerspace ID.

The MakerFX makerspace ID is located in the #mfx-cnc channel as a pinned post. Highlight and copy the ID to the clipboard. Ctrl-V to paste the ID into the dialog box.

Restart VCarve Pro. Confirm you are using the Makerspace license by checking the Help About menu.