Difference between revisions of "Downloading and installing instructions for V-Carve Makerspace Edition"

From MakerFX Wiki!
Jump to: navigation, search
m (Added Category)
(2 intermediate revisions by 2 users not shown)
Line 7: Line 7:
 
Start VCarve Pro.  Select Help -> About VCarve Pro -> Enter Makerspace ID.
 
Start VCarve Pro.  Select Help -> About VCarve Pro -> Enter Makerspace ID.
  
The MakerFX makerspace ID is '''located in the '''#mfx-cnc''' channel as a pinned post'''.  Highlight and copy the ID to the clipboard.  Ctrl-V to paste the ID into the dialog box.
+
The MakerFX makerspace ID is '''[https://makereffect.slack.com/archives/C1FJND17E/p1466949250000035 located in the #mfx-cnc channel as a pinned post]'''.  Highlight and copy the ID to the clipboard.  Ctrl-V to paste the ID into the dialog box.
  
 
Restart VCarve Pro.  Confirm you are using the Makerspace license by checking the Help About menu.
 
Restart VCarve Pro.  Confirm you are using the Makerspace license by checking the Help About menu.
 +
 +
[[Category:CNC Router]]

Revision as of 21:02, 30 August 2022

The VCarve Makerspace Edition will only work with the MakerFX CNC routers: Forest CNC.

Go to the VCarve download page and click on the green VCarve Pro Download Trial Software button. Follow the instruction for installing the software.

VCarve Pro only supports Windows operating systems. So if you are a Mac user you will need to run Windows as a VM to use this software on a personal device.

Start VCarve Pro. Select Help -> About VCarve Pro -> Enter Makerspace ID.

The MakerFX makerspace ID is located in the #mfx-cnc channel as a pinned post. Highlight and copy the ID to the clipboard. Ctrl-V to paste the ID into the dialog box.

Restart VCarve Pro. Confirm you are using the Makerspace license by checking the Help About menu.