How to Embroider with the Barudan BENT-ZQ-201U

From MakerFX Wiki!
Jump to: navigation, search

The Barudan BENT-ZQ-201U at our MakerSpace is a powerful tool, but it is not a new machine. This model was built between 1997 and 2003, so the technology isn't state-of-the-art, but it does work. When you are using the Barudan, remember to take things slowly and wait for the machine to respond before trying to move forward to the next step by pushing another button. If you confuse the machine, simply power down and start over.


Front of Machine

Contents

Anatomy of the Automat

The Automat is where you will find all of the commands for operating the machine, for moving through various menus, and for executing menu commands.

Front of Machine


The Automat has a LCD and a series of buttons. The icons about these buttons change according to the various functions being performed during the embroidery process.

Automat


The Menu keys (A-D and Menu) correspond to the icons which are displayed above them on the LCD. The 'Menu' key moves to the next set of commands.

ABCDMenu buttons


The set of Jog Keys allow you to move the pantograph to position the item you're embroidering under the sewing head.

Jog Keys


The button under the Needle Icon is the Drive button. When Drive is engaged, the amber light is steady on. When the amber light is blinking, Drive is disengaged. The button under the green icon with the arrow is Go, and the button under the red icon with the square is Stop. if there are problems with the process, use the Stop button.

THE EMERGENCY STOP BUTTON SHOULD ONLY BE USED IN THE CASE OF A TRUE EMERGENCY. If an emergency stop is required, please discontinue used until the Barudan can be inspected by one of the Persons of Contact.

Drive, Go, and Stop buttons====

Waking the Barudan Up

Turn on the power switch and press the green button.

Power Switch and On Button


If all files were removed from memory at the end of the previous session, you will see the error message shown below. It's the Automat's way of letting you know that there is no file saved in memory to be embroidered. Select the 'D' button under the checkbox icon to clear the warning.

No files In Memory Error Message


The next screen to appear (the first screen if there are files stored in memory) is the Origin Set Screen. Select the 'D' button under the return icon to allow the sewing head to orient itself.

Initial Origin Screen


You may see a screen which asks if you wish to continue with the previous design. Select the button below either 'Y' or 'N', depending on your preference.

Preparing the Needles

If you changed colors for any of the needles, threads will be hanging beneath the presser feet as shown below. Unsecured threads will become tangled in the working threads and may cause other problems.

Threads hanging loose after being rethreaded.


The Barudan is equipped with a Thread Keep, which encloses a velcro pad to keep the threads safely stored when not in active use.

Threads safe in the thread keep.


Change the Active Needle to the one that needs to be stored. Choose ‘Cut’ to have the thread stored. You will hear four beeps. When all are in the Velcro storage bar, push down the presser foot for the active needle