Difference between revisions of "Laser Epilog"
(→Consumables) |
(→Consumables) |
||
| Line 9: | Line 9: | ||
=Consumables= | =Consumables= | ||
| + | ==Safe Materials To Engrave== | ||
| + | Many types of materials are safe to engrave with the laser. The list below are some of the common materials that can be used. If you are ever in doubt about a material, ASK before using: | ||
| + | *Untreated woods | ||
| + | *Paper and card stock | ||
| + | *Untreated Leather (treated leather has the potential for producing toxic gases) | ||
| + | *Glass | ||
| + | *Ceramic | ||
| + | *Granite | ||
| + | *Acrylic | ||
| + | |||
| + | ==DANGEROUS Materials== | ||
| + | While there are many safe materials to use in the laser, there are some that are very dangerous. Many plastics and even some other materials that have been chemically treated have the potential of producing chlorine gas and other toxins when burned. These gases can be both very poisonous to those around the laser, but also very corrosive causing severe damage to the equipment. If you are unsure of a material, ask another member. It is best to be overcautious about the materials you choose. There are ways to identify materials, one of which is a burn test as described in this post called [http://hackaday.com/2015/03/14/how-to-identify-plastics-before-laser-cutting-them/ How to Identify Plastics Before Laser Cutting Them]. | ||
| + | |||
| + | ==Other Useful Materials== | ||
*Alcohol wipes | *Alcohol wipes | ||
*Masking tape (wide blue type) | *Masking tape (wide blue type) | ||
Revision as of 07:24, 9 August 2017
Point Of Contact @JStutz on Slack or by e-mail at james_stutz@hotmail.com
Contents
General Policies for the Laser Zone
Equipment
Consumables
Safe Materials To Engrave
Many types of materials are safe to engrave with the laser. The list below are some of the common materials that can be used. If you are ever in doubt about a material, ASK before using:
- Untreated woods
- Paper and card stock
- Untreated Leather (treated leather has the potential for producing toxic gases)
- Glass
- Ceramic
- Granite
- Acrylic
DANGEROUS Materials
While there are many safe materials to use in the laser, there are some that are very dangerous. Many plastics and even some other materials that have been chemically treated have the potential of producing chlorine gas and other toxins when burned. These gases can be both very poisonous to those around the laser, but also very corrosive causing severe damage to the equipment. If you are unsure of a material, ask another member. It is best to be overcautious about the materials you choose. There are ways to identify materials, one of which is a burn test as described in this post called How to Identify Plastics Before Laser Cutting Them.
Other Useful Materials
- Alcohol wipes
- Masking tape (wide blue type)
