Difference between revisions of "MakerFX Routine Maintenance"

From MakerFX Wiki!
Jump to: navigation, search
 
Line 11: Line 11:
 
*Wax the cast iron tables on tools
 
*Wax the cast iron tables on tools
 
*#[http://wiki.makerfx.org/Dewalt_20_inch_Scroll_Saw_Routine_Maintenance Scroll Saw]
 
*#[http://wiki.makerfx.org/Dewalt_20_inch_Scroll_Saw_Routine_Maintenance Scroll Saw]
 +
*#[http://wiki.makerfx.org/Craftsman_113.24041C_10_inch_Table_Saw Craftsman Table Saw]
 
*[http://wiki.makerfx.org/Jet_AFS-1000B_Air_Filtration_System_Routine_Maintenance#Changing_and_Cleaning_Filters Clean or replace] the air filters in the [http://wiki.makerfx.org/Wood_Zone Wood Zone] [http://wiki.makerfx.org/Jet_AFS-1000B_Air_Filtration_System Overhead Air Filtration System]
 
*[http://wiki.makerfx.org/Jet_AFS-1000B_Air_Filtration_System_Routine_Maintenance#Changing_and_Cleaning_Filters Clean or replace] the air filters in the [http://wiki.makerfx.org/Wood_Zone Wood Zone] [http://wiki.makerfx.org/Jet_AFS-1000B_Air_Filtration_System Overhead Air Filtration System]
 
=6 Months=
 
=6 Months=

Latest revision as of 16:14, 24 July 2017

Daily

  • Drain the shop air compressor

Weekly

  • Check bathroom for TP, soap and paper towels
  • Empty the shop vacuums and clean filters
  1. Fein Turbo 1 Dust Extractor
  • Empty the Wood Zone dust collector and clean filters
  • Empty all trash cans

3 Months (Jan, April, July, October)

6 Months

Yearly

Interval To Be Determined


Go To the Main Page

Report Dead Links