Prazi SD300 Mini Lathe

From MakerFX Wiki!
Revision as of 20:32, 10 January 2018 by Joe.Gravelle (talk | contribs)
Jump to: navigation, search

Location: MetalWorking Zone

Point Of Contact @joe.gravelle on Slack or by e-mail at Joseph.Gravelle@Gmail.com
Prazi SD300 Mini Lathe Stock Photo


General Policies for the Prazi SD300 Mini Lathe

  • Membership Form must be filled out
  • Member must be cleared on all safety and machine operation
  • Bring your own tooling and materials

  • Information

    Current Machine State is out of commission. Currently waiting for parts to replace the chuck and other small misc items. Powerfeed is inoperable as well, will require a DIY solution.

    Lathe Safety

  • if you are unsure of how to use the machine, do not use it please
  • Tie back long hair, roll up long sleeves, remove any bracelets or jewelry from wrists and neck
  • Wear Safety Glasses At All Times, this is not a suggestion, it is law
  • Items Needed to Refurb the Lathe

  • New Chuck, considering 4"
  • Tail stock and drill chuck
  • 1MT reamer to clean tail stock bore
  • Quick change tool holder
  • home-brew power feed solution or source oem parts to fix the power feed
  • Tooling and Consumables

    Helpful Tutorials / Resources