Difference between revisions of "X-Carve 1000mm CNC Router - Deprecated"

From MakerFX Wiki!
Jump to: navigation, search
(Information)
(22 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
{{MFXReserveToolTime}}
 +
 
Location: [[Wood Zone]]  
 
Location: [[Wood Zone]]  
  
Line 16: Line 18:
 
==X-Carve Operation Instructions==
 
==X-Carve Operation Instructions==
 
*[[Maker FX X-Carve 1000mm CNC Router Instructions]]
 
*[[Maker FX X-Carve 1000mm CNC Router Instructions]]
 +
 
==X-Carve Hardware==
 
==X-Carve Hardware==
*[https://planet-cnc.com/wp-content/uploads/2016/03/CNCUSBControllerMk34.pdf PlanetCNC USB Controller Hardware Manual]
+
*PlanetCNC USB Controller MK3/4 ([https://planet-cnc.com/hardware/#products-hardware website])
*[https://planet-cnc.com/wp-content/uploads/2016/03/CNCUSBController.pdf PlanetCNC USB Controller Software Manual]
+
**[https://planet-cnc.com/wp-content/uploads/2016/03/CNCUSBControllerMk34.pdf PlanetCNC USB Controller Hardware Manual]
 +
**[https://planet-cnc.com/wp-content/uploads/2016/03/CNCUSBController.pdf PlanetCNC USB Controller Software Manual]
 +
*Super-PID Router Speed Control ([http://www.vhipe.com/product-private/index.htm website])
 +
**[http://www.vhipe.com/product-private/SuperPID-v2_Instructions.pdf Super-PID Router Speed Control Manual]
 +
 
 
==VCarve==
 
==VCarve==
*[http://wiki.makerfx.org/VCarveTutorial V-Carve Tutorial]
+
*[[VCarveTutorial | VCarve Tutorial]]
 
*[http://forum.vectric.com VCarve Forum]
 
*[http://forum.vectric.com VCarve Forum]
 
*[http://support.vectric.com/tutorials/V8/VCarveProCategoryIndex.html Videos of Sample Projects]
 
*[http://support.vectric.com/tutorials/V8/VCarveProCategoryIndex.html Videos of Sample Projects]
 
*[http://support.vectric.com/vcp-questions VCarve Pro FAQ]
 
*[http://support.vectric.com/vcp-questions VCarve Pro FAQ]
 +
 
==Other Resources for the X-Carve==
 
==Other Resources for the X-Carve==
 
*[http://gadgets.vectric.com/library.html#Toolpath Gadget library] These are software add-ons that make designing easier
 
*[http://gadgets.vectric.com/library.html#Toolpath Gadget library] These are software add-ons that make designing easier
Line 31: Line 39:
  
 
=Videos=
 
=Videos=
 +
* [https://youtu.be/J5Kl2VQvTlc MakerFX How-to: Squaring the X-Carve y-axis at startup]
 +
* [https://www.youtube.com/watch?v=9DD6T84jbXc YouTube: V Bits Explained]
 +
* [https://youtu.be/ayr-9W0lrL0?t=4m YouTube: Endmills and Collets Explained]
  
=Accessories=
+
=Router Bits (aka Endmills)=
 +
*[http://a.co/050XxRN Whiteside 1/4", 2 Flute, Down Cut Spiral Bit (RD2100)]
 +
*[http://a.co/bvmcMnu Whitside 1/4", 2 Flute, Up Cut Spiral Bit (RU2100)]
 +
*[http://a.co/bb1fTfk Whitside 1/4", Router Bit Starter Kit, 5-piece]
 +
*[http://a.co/b4q4jct Whiteside 1/4", V-Groove 60-Degree Router Bit]
  
 
=Consumables=
 
=Consumables=
Depending on the tool the X-Carve is fitted with, there are a variety of materials that can be machined, including:  
+
*Depending on the tool the X-Carve is fitted with, there are a variety of materials that can be machined, including:  
* Wood
+
** Wood
* Plastic  
+
** Plastic  
* Metal
+
** Metal
* Foam
+
** Foam
* Circuit Boards
+
** Circuit Boards
* and more...  
+
** and more...  
  
 
If there is ever a question about if a material is suitable for the CNC, please ask.
 
If there is ever a question about if a material is suitable for the CNC, please ask.
Line 48: Line 63:
 
*[[X-Carve 1000mm CNC Router Routine Maintenance|Routine Maintenance]]
 
*[[X-Carve 1000mm CNC Router Routine Maintenance|Routine Maintenance]]
 
*[[X-Carve 1000mm CNC Router Maintenance Log|Maintenance Log]]
 
*[[X-Carve 1000mm CNC Router Maintenance Log|Maintenance Log]]
 +
 +
=Troubleshooting=
 +
*Speed Controller won't maintain speed - The original owner used reflective tape instead of white paint in the router for the optical sensor with the Super-PID speed controller. Replaced tape with white paint as per instructions in Super-PID manual (linked above) DO NOT ATTEMPT TO FIX, please contact X-Carve POC or post in slack channel.
 +
 
----
 
----
 
[[Main Page|Go to the Main Page]]
 
[[Main Page|Go to the Main Page]]
  
 
[[Report_Dead_Links_Here|Report Dead Links]]
 
[[Report_Dead_Links_Here|Report Dead Links]]

Revision as of 04:18, 27 September 2018

edit 

REMEMBER To Reserve Time!

Various tools such as the lasers (Epilog or Audrey), 3D Printers, and Forest CNC need to be reserved before using the tool. Review the Slack channel for the tool to reserve time.


Location: Wood Zone

Point Of Contact @joe.gravelle on Slack or by e-mail at Joseph.Gravelle@Gmail.com
X-Carve 1000mm CNC Router

MakerFX has an X-Carve 1000mm CNC Router. The X-Carve uses cutting bits to carve wood, plastics, thin aluminum and more. MakerFX membership provides training and use of the cnc router for prototyping and creative projects. We use VCarve software to design projects.

Vectric’s VCarve Pro is a very powerful, but exceptionally easy to use software solution for people wanting to design and machine parts for a wide variety of CNC machines. MakerFX provides the V-Carve Pro Makerspace Edition software for member use. Downloading and installing instructions for V-Carve Makerspace Edition

This CNC Router is equipped with a Super PID Router Speed Controller, a Planet CNC Controller. The spindle is a DeWalt 611 trim router rated at 1-1/4HP (7.0 Amps) with a no load speed of 16,000-27,000rpm. A properly tuned and calibrated machine should get to a resolution of ~0.075mm to 0.13mm.

General Policies for the X-Carve 1000mm CNC Router

Minors can only operate the X-Carve 1000mm CNC Router under MakerFX member adult supervision.

Information

X-Carve Operation Instructions

X-Carve Hardware

VCarve

Other Resources for the X-Carve

Videos

Router Bits (aka Endmills)

Consumables

  • Depending on the tool the X-Carve is fitted with, there are a variety of materials that can be machined, including:
    • Wood
    • Plastic
    • Metal
    • Foam
    • Circuit Boards
    • and more...

If there is ever a question about if a material is suitable for the CNC, please ask.

Maintenance

Troubleshooting

  • Speed Controller won't maintain speed - The original owner used reflective tape instead of white paint in the router for the optical sensor with the Super-PID speed controller. Replaced tape with white paint as per instructions in Super-PID manual (linked above) DO NOT ATTEMPT TO FIX, please contact X-Carve POC or post in slack channel.

Go to the Main Page

Report Dead Links