Needle Position on the Barudan BENT-ZQ-201U - Revision history

Carol M Franklin at 23:08, 10 March 2023

2023-03-10T23:08:54Z

Carol M Franklin at 18:31, 10 March 2023

2023-03-10T18:31:41Z

Carol M Franklin: /* The Needle Position is also indicated on the LCD screen. IF THESE DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY. */

2023-03-10T18:31:04Z

‎The Needle Position is also indicated on the LCD screen. IF THESE DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY.

Carol M Franklin at 18:30, 10 March 2023

2023-03-10T18:30:43Z

Carol M Franklin at 18:30, 10 March 2023

2023-03-10T18:30:03Z

Carol M Franklin at 18:28, 10 March 2023

2023-03-10T18:28:37Z

Carol M Franklin: /* NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat. */

2023-03-08T23:35:59Z

‎NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.

Carol M Franklin at 23:35, 8 March 2023

2023-03-08T23:35:22Z

Carol M Franklin at 23:34, 8 March 2023

2023-03-08T23:34:04Z

Carol M Franklin at 23:32, 8 March 2023

2023-03-08T23:32:10Z

← Older revision		Revision as of 23:08, 10 March 2023
Line 42:		Line 42:

	===NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.===		===NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.===
		+
		+
		+
		+
		+	[[Sewing & Embroidery Zone\|Return to Embroidery How To]]
		+
		+	----
		+	[[Main_Page\|Go to Main Page]]
		+
		+	[[Report_Dead_Links_Here\|Report Dead Links]]

@@ Line 1: / Line 1: @@
-The Barudan BENT-ZQ-201U has fifteen separate needles. The active needle is the one where the round hole above the last thread guide is filled with a red disc:
+The Barudan BENT-ZQ-201U has fifteen separate needles. The active needle is the one where the round hole above the last thread guide is filled with a red disc as shown below. The Needle Position is also indicated on the LCD screen. '''IF THESE DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY.'''
 <div style="clear: both"></div>
 [[File:Barudan_Needle_Position_Indicator.png|border|500px|alt=Active Needle Position Indicator]]
 <div style="clear: both"></div>
 ==Changing the Active Needle==

@@ Line 4: / Line 4: @@
 <div style="clear: both"></div>
-===The Needle Position is also indicated on the LCD screen. '''IF THESE DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY.'''===
+The Needle Position is also indicated on the LCD screen. '''IF THESE DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY.'''
 ==Changing the Active Needle==

@@ Line 1: / Line 1: @@
 The Barudan BENT-ZQ-201U has fifteen separate needles. The active needle is the one where the round hole above the last thread guide is filled with a red disc:
 [[File:Barudan_Needle_Position_Indicator.png|border|500px|alt=Active Needle Position Indicator]]
 <div style="clear: both"></div>
-The Needle Position is also indicated on the LCD screen. '''IF THESE DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY.'''
+===The Needle Position is also indicated on the LCD screen. '''IF THESE DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY.'''===

@@ Line 2: / Line 2: @@
 [[File:Barudan_Needle_Position_Indicator.png|border|500px|alt=Active Needle Position Indicator]]
 <div style="clear: both"></div>
@@ Line 41: / Line 43: @@
 ===NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.===

← Older revision		Revision as of 18:28, 10 March 2023
Line 41:		Line 41:

	===NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.===		===NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.===
		+
		+
		+
		+	==The selected needle appears on the screen and with a red dot over its presser foot. IF THESE THINGS DON'T MATCH, DO NOT USE THE MACHINE. CONTACT THE PoC IMMEDIATELY.

← Older revision		Revision as of 23:35, 8 March 2023
Line 40:		Line 40:


−	==NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.==	+	===NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.===

@@ Line 21: / Line 21: @@
 [[File:Barudan_Needle_Move.png|border|500px|alt=Needle Position Move menu]]
 <div style="clear: both"></div>
@@ Line 41: / Line 38: @@
 [[File:Barudan_Needle_Selection.png|border|500px|alt=Needle selection menu]]
 <div style="clear: both"></div>

← Older revision		Revision as of 23:34, 8 March 2023
Line 21:		Line 21:
	[[File:Barudan_Needle_Move.png\|border\|500px\|alt=Needle Position Move menu]]		[[File:Barudan_Needle_Move.png\|border\|500px\|alt=Needle Position Move menu]]
	<div style="clear: both"></div>		<div style="clear: both"></div>
		+
		+
		+	==NOTE: When the machine is first powered on, the machine must be oriented to the correct position. After following the steps above, the D14 error message displays. Press the START key on the Automat.