Difference between revisions of "Maslow 4x8' CNC Router"
(Maslow 4x8' CNC Router) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | https://images.squarespace-cdn.com/content/v1/57e561e720099e0d7a7f6aca/1515112887401-09COGTSIBFFTY15UUCA3/ke17ZwdGBToddI8pDm48kIp3N2lTlI4sPCB3LyO3KrpZw-zPPgdn4jUwVcJE1ZvWQUxwkmyExglNqGp0IvTJZamWLI2zvYWH8K3-s_4yszcp2ryTI0HqTOaaUohrI8PIKTxn7pXa8u1FPG7U_hvq7zI8X5MNlJ7oyFLsMD219xgKMshLAGzx4R3EDFOm1kBS/IMG_20171114_141507833_HDR.jpg | |
| − | Maslow Settings: | + | |
| − | WebMCP (Debug): 192.168.1.212:5000 | + | == Maslow Settings: == |
| − | WebControl: 192.168.1.212:5001 | + | |
| + | *WebMCP (Debug): 192.168.1.212:5000 | ||
| + | *WebControl: 192.168.1.212:5001 | ||
WebControl is a web-based version of Ground Control primarily designed to run on a Raspberry Pi in a headless environment (headless meaning no screen/keyboard attached). There are two separate programs, WebMCP is a sort of watchdog/control program that allows you to stop, start and update the actual WebControl program. WebMCP can be reached on port 5001 and after you start WebControl from that screen, you can reach WebControl on port 5000. | WebControl is a web-based version of Ground Control primarily designed to run on a Raspberry Pi in a headless environment (headless meaning no screen/keyboard attached). There are two separate programs, WebMCP is a sort of watchdog/control program that allows you to stop, start and update the actual WebControl program. WebMCP can be reached on port 5001 and after you start WebControl from that screen, you can reach WebControl on port 5000. | ||
| + | == Ground Control Alternate == | ||
| + | http://maslowcommunitygarden.org/GroundControl.html?instructions=true | ||
| + | |||
| + | == Calibration == | ||
| − | + | *offset height: 450.85 | |
| − | offset height: 450.85 | + | *dist w motor: 3002.77 |
| − | dist w motor: 3002.77 | + | *sled to cutter: 139 |
| − | sled to cutter: 139 | ||
Latest revision as of 14:32, 8 December 2019
Maslow Settings:
- WebMCP (Debug): 192.168.1.212:5000
- WebControl: 192.168.1.212:5001
WebControl is a web-based version of Ground Control primarily designed to run on a Raspberry Pi in a headless environment (headless meaning no screen/keyboard attached). There are two separate programs, WebMCP is a sort of watchdog/control program that allows you to stop, start and update the actual WebControl program. WebMCP can be reached on port 5001 and after you start WebControl from that screen, you can reach WebControl on port 5000.
Ground Control Alternate
http://maslowcommunitygarden.org/GroundControl.html?instructions=true
Calibration
- offset height: 450.85
- dist w motor: 3002.77
- sled to cutter: 139
