Flashforge 3D Printers

From MakerFX Wiki!
Jump to: navigation, search


A member is planning to donate 2 Creator Pros which will add ABS printing capability to the 3D printers at MakerFX

Pre-Flight Instructions

Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.

Step Text Instructions Video Instructions
1 TODO: Calibration Need volunteer!
2 TODO: Setting nozzle height Need volunteer!
3 Instructions if you need to unload filament Need volunteer!
4 Loading filament Need volunteer!
5 Preparing to print Need volunteer!

Flashforge Printers at MakerFX (Coming Soon!!!)

The Flashforge printers have OctoPrint built-in which includes a built-in slicer. Click any of the printers below to be directed to OctoPrint.



225mm x 148mm x 150mm 225mm x 148mm x 150mm
Heated Bed = Yes Heated Bed = Yes
Nozzle = 0.40 Nozzle = 0.40


  • Isopropyl Alcohol
  • Acetone
  • Purple Disappearing Glue Stick

Go to Main Page

Report Dead Links