Grizzly G0755 Mill
Description
The Model G0755 is a free-standing mill/drill that strikes a great balance between being heavy-duty and high-precision.
The spindle is equipped with precision P5 spindle bearings and is driven by an oil-bath-lubricated and gear-driven headstock. The spindle is fully reversible and features both coarse and fine downfeed controls. The six spindle speeds range from 90–1970 RPM and are controlled by convenient gear-change levers.
The headstock tilts 90° left/right and moves in the Z-axis along precision dovetailed ways—with both manual and powered elevation control. The table also features both manual and powered X-axis control, but with a manually-controlled Y-axis. All table movement is along scraped dovetail ways.
Opperation
turning on the mill
- press the emergency stop
- turn the emergency stop clockwise (the direction the arrows indecate) a quarter turn until it pops out.
- press the power lamp button (if the machine has power and the emergency stop is out, it will turn green)
- press the spindle forward to engage the mill, and the spindle off to stop opperatuon.
- at any point the emergency stop may be used, but the start up procedure woll need to he repeated.
turning on the Digital Readout
the digital readout is the X,Y tracking screen to the upper right of the mill.
- the power switch it located on the back for the screen to the left of the power cord.
- the readout is seperately powered, and must be turned off seperstely when done.
Helpful Links
Grizzly G0755 specifications can be found here.
Gizzly G0755 owners manual can be found here.
Squaring 6 sides of a work piece