Difference between revisions of "Barudan BENT-ZQ-201U Embroidery Machine"

From MakerFX Wiki!
Jump to: navigation, search
(→‎Overview)
 
(41 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
{{MFXReserveToolTime}}
 
=Overview=
 
=Overview=
  
−
The Barudan BENT-ZQ-201U "Elite" is a 15 needle single head professional embroidery machine - this means you can have 15 colors in a design without stopping to change thread colors - but only do one piece of art at a time. (Barudan also makes multiple head machines that can embroider multiple pieces of art at the same time)
+
The Barudan BENT-ZQ-201U "Elite" is a 15 needle single head professional embroidery machine - this means you can have 15 colors in a design without stopping to change thread colors - but only do one garment, hat, etc. at a time. (Barudan also makes multiple head machines that can embroider multiple pieces of art at the same time)
 
*When we called shopBarudan, they pronounce the name BEAR - EWW - DAN
 
*When we called shopBarudan, they pronounce the name BEAR - EWW - DAN
 
*BENT designates the electronics - series and model of the machine - The BENT has a built-in driver box and a monochrome graphic LCD "automat"
 
*BENT designates the electronics - series and model of the machine - The BENT has a built-in driver box and a monochrome graphic LCD "automat"
 
*ZQ is the head style designator ZQ is a 15 needle inline geometry with individual takeup
 
*ZQ is the head style designator ZQ is a 15 needle inline geometry with individual takeup
 
*201  indicates this model has a ositive Drive presser foot lift mechanism"
 
*201  indicates this model has a ositive Drive presser foot lift mechanism"
−
*U is an option code for the "Under-thread Sensor Mechanism"
+
*U is an option code for the "Under-thread Sensor Mechanism" or UTSM. This sensor detects thread breaks and stops stitching.
 
*This model is also sometimes called "Tanto"
 
*This model is also sometimes called "Tanto"
 
*These machines were manufactured between 1997 and 2003
 
*These machines were manufactured between 1997 and 2003
Line 17: Line 18:
  
 
= Current State =  
 
= Current State =  
−
*Machine has been donated, and is currently in the MakerFX shop (next to screenprinting) awaiting repair.
+
*We've verified that the machine functions, and can embroider. (YAY!!) All 15 needles are currently operational. About half of the thread break sensors are not detecting breaks. If a thread breaks while stitching the machine may continue to stitch without thread. Thread breaks are fairly common for various reasons (on any embroidery machine). So, do not leave the machine unattended as you may end up with a project that is only hole-punched.
−
*Graphic LCD (Hitachi LMG6911RPBC-00T ([http://www.displaysscreen.com/original-lmg6911rpbc00t-hitachi-screen-57-320%C3%97240-lmg6911rpbc00t-display-p-1528.html specs]) is not working (has backlight, but no display), but pressing buttons causes the machine to start moving, and appears to have proper movement on axis and head. LCD is Barudan part EBY01260, but is not available through shopbarudan.com Update: There is a -24v inverter for the graphic LCD that is dead. An external power supply works for the LCD, so Neil is making a board to drive it that will fit in the case.
+
*The cap frame has been verified as functional! :)
−
*Internal memory is good, the machine had stored stitch files
+
*Software available is Embrilliance on the embroidery computer. Demo versions can be downloaded for practice and learning that are fully functional but will not save. [http://embrilliance.com/demonstration-versions Embrilliance Demo]
 +
 
 +
=Items to Fix or Purchase=
 +
*Ribbon Cable mounting to head - Barudan sells a clip that holds the cable to the back of the head for $5ish
 
*Broken - Barudan LA250051 Head Cover HQ ([http://www.shopbarudan.com/p-2338-la250051-head-cover-zq.aspx LA200051])  - $45.88
 
*Broken - Barudan LA250051 Head Cover HQ ([http://www.shopbarudan.com/p-2338-la250051-head-cover-zq.aspx LA200051])  - $45.88
 
*Broken - Barudan P732014 Cover (E-stop) - [https://www.flickr.com/photos/iancole/38598386315/in/album-72157662287271457/ Pic] - ([http://www.shopbarudan.com/p-2429-p732014-cover-end-r-whole-mf250120.aspx P732014]) - $36.90
 
*Broken - Barudan P732014 Cover (E-stop) - [https://www.flickr.com/photos/iancole/38598386315/in/album-72157662287271457/ Pic] - ([http://www.shopbarudan.com/p-2429-p732014-cover-end-r-whole-mf250120.aspx P732014]) - $36.90
 
*Plastics are yellowed - [https://en.wikipedia.org/wiki/Retr0bright Retr0bright] might be a good project to restore the color
 
*Plastics are yellowed - [https://en.wikipedia.org/wiki/Retr0bright Retr0bright] might be a good project to restore the color
−
*Needle Change Stepper - stepper motor driver appears to be bad. [http://www.bdent.com/mtd2001-shindengen-zip27-integrated-circuit.html MTD2001] - Replacement ordered (qty 2). [http://datasheet.octopart.com/MTD2001-Shindengen-datasheet-105416.pdf Datasheet]
+
*Thread break sensors - Need help from someone good with electronics. Contact Lucy.
−
*Tension Post Sensor Wheels (HT240290) are cracking / broken. Ian ordered a new set from China to arrive late Jan. [https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180108072239&SearchText=HT240290 AliExpress - Tension Post Sensor Wheel HT240290 for Barudan embroidery]
+
 
 +
 
 +
= Completed Items =
 +
*Graphic LCD (Hitachi LMG6911RPBC-00T ([http://www.displaysscreen.com/original-lmg6911rpbc00t-hitachi-screen-57-320%C3%97240-lmg6911rpbc00t-display-p-1528.html specs]) was not working due to a bad -24 inverter power supply. Neil made a small PS board and mounted it inside the electronic chassis. [https://www.flickr.com/photos/iancole/39626219002 Pic 1] [https://www.flickr.com/photos/iancole/25784980908/ Pic 2] [https://www.flickr.com/photos/iancole/39626218102/ Pic 3]
 +
*Needle Change Errors - The machine needed a full degreasing, cleaning and lubrication. We'd purchased stepper motor drivers in the event they needed to be replaced, they will now be stored as parts. [http://www.bdent.com/mtd2001-shindengen-zip27-integrated-circuit.html MTD2001] - Replacement ordered (qty 2). [http://datasheet.octopart.com/MTD2001-Shindengen-datasheet-105416.pdf Datasheet]
 +
*Lithium battery - Internal memory is good, the machine had stored stitch files
 +
* [http://www.shopbarudan.com/p-3354-nb10035-elite-bent-training-cd.aspx Training CD (NB10035)] - Obtained; to be loaded on device to stay near machine
 +
* Operators Manual (B8300) ordered from shopBarudan on 1/08/2017 - Obtained; will be located with machine; later found the originals (they are older version?) in the bottom of the thread box
 +
*Replaced - Baruan Needle Clamp Screw (KF230240) - 4 are broken - [http://www.shopbarudan.com/p-2166-kf230240c-needle-clamp-screw-silver-sm-964-40x6.aspx shopBarudan] -  $.041 - Ian ordered 20 from SewManyParts, they are now in the parts bin.
 +
*Helpful - Thread Tension Gauge (top thread) - [https://allstitch.net/product/embroidery-thread-tension-gauge-4005.cfm Allstitch embroidery] - $19.75 - received
 +
*Helpful - Bobbin Tension Gauge - [https://www.amazon.com/Towa-M-Style-Sewing-Thread-Tension/dp/B00MFS2APS/ Amazon] - $54.95 - received
 +
*Fixed- Tension Post Sensor Wheels (HT240290) are cracking / broken. Ian ordered a new set (18) from China. [https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180108072239&SearchText=HT240290 AliExpress - Tension Post Sensor Wheel HT240290 for Barudan embroidery] - The parts have arrived, but it is a good bit of work to replace them, so we are going to keep moving for now, then do a teardown at a later date. At the moment only needle #15 is broken beyond use.
 +
*Tension spring #4 warped - Spring item #HT240094 ordered and replaced.
  
 
= Parts =  
 
= Parts =  
Line 38: Line 54:
 
* There is a box of various embroidery thread cones with the machine [https://www.flickr.com/photos/iancole/39495056871/in/album-72157662287271457/ Pic]
 
* There is a box of various embroidery thread cones with the machine [https://www.flickr.com/photos/iancole/39495056871/in/album-72157662287271457/ Pic]
 
* There is a box of various embroidery backing with the machine [https://www.flickr.com/photos/iancole/39464722142/in/album-72157662287271457/ Pic]
 
* There is a box of various embroidery backing with the machine [https://www.flickr.com/photos/iancole/39464722142/in/album-72157662287271457/ Pic]
 +
* Bobbin Cases - These break occasionally, need to keep some on-hand. [https://www.amazon.com/Cutex-Sewing-Pig-tail-Embroidery-Machines/dp/B01B16G33E/ Amazon]  Roughly $28 for 6.
  
 
= To Research =  
 
= To Research =  
Line 43: Line 60:
 
* [https://www.plrelectronics.com/usb-reader/ "Black Box" USB reader & file transmission (serial) to Barudan Embroidery Machines] - [https://www.youtube.com/watch?v=PnxHvEnnOLw Demo Video] - $585 (yikes!) - Time for Octoprint for Embroidery...this is a perfect maker project...
 
* [https://www.plrelectronics.com/usb-reader/ "Black Box" USB reader & file transmission (serial) to Barudan Embroidery Machines] - [https://www.youtube.com/watch?v=PnxHvEnnOLw Demo Video] - $585 (yikes!) - Time for Octoprint for Embroidery...this is a perfect maker project...
 
* [http://www.shopbarudan.com/p-3054-a100625-usb-serial-adapter.aspx Barudan Serial Adapter] - $48.25
 
* [http://www.shopbarudan.com/p-3054-a100625-usb-serial-adapter.aspx Barudan Serial Adapter] - $48.25
−
* [http://www.shopbarudan.com/p-3354-nb10035-elite-bent-training-cd.aspx Barudan BENT Training CD] - $25
 
  
 
= Floppy Drive Replacement =  
 
= Floppy Drive Replacement =  
−
* Gotek brand drive - Bill provided one to test, if it works we will return / replace it - [https://www.amazon.com/Gotek-SFR1M44-U100-1-44MB-Floppy-Emulator/dp/B0762NCHC6 Amazon link]
+
* Gotek brand drive - Purchased, but have not decided to install - [https://www.amazon.com/Gotek-SFR1M44-U100-1-44MB-Floppy-Emulator/dp/B0762NCHC6 Amazon link]
−
* [https://github.com/keirf/FlashFloppy Flashfloppy] - better software for the gotek drives, and will let us set for 720k if needed
+
* [https://github.com/keirf/FlashFloppy Flashfloppy] - better software for the gotek drives.
  
 
= Software Support =  
 
= Software Support =  
−
* [http://www.barudanamerica.com/index/software/tes.html Barudan TES] - Full embroidery design software from Barudan. There is a free viewer version that will convert .dst to .fmc if needed. There is a TES CD (version?) with the machine, we have not tested it. TES Supports serial transfer to the embroidery machine. (Could be good for reverse engineering the protocol)
+
* The Barudan Elite can consume the industry-standard .DST format (which does NOT have needle assignment), as well as the .UXY format (in the form of files named with .U01, .U02, etc.) which does support needle assignment.
 +
* [http://www.barudanamerica.com/index/software/tes.html Barudan TES] - Full embroidery design software from Barudan. We have an older copy of TES 2.0 that is running on an old Windows XP laptop. It is functional and can serial transfer to the embroidery machine. (Could be good for reverse engineering the protocol)
 
* [http://www.embird.net/sw/embird/tutorial/barlnkup/barlnkup.htm Embird support for Barudan serial transfer] - [http://www.embird.net/manual/xtxtsnippet/barudandiagram.htm Embird cable wiring] (Embird has been emailed to inquire about non-profit pricing)
 
* [http://www.embird.net/sw/embird/tutorial/barlnkup/barlnkup.htm Embird support for Barudan serial transfer] - [http://www.embird.net/manual/xtxtsnippet/barudandiagram.htm Embird cable wiring] (Embird has been emailed to inquire about non-profit pricing)
−
* [https://www.wilcom.com/en-us/gethelp/support/embroiderymachineconnection.aspx Wilcom] - Serial Connection - Note that the "Tanto" designation is used here instead of BENT or Elite
+
* [https://www.wilcom.com/en-us/gethelp/support/embroiderymachineconnection.aspx Wilcom] - Serial Connection - Note that the "Tanto" designation is used here instead of BENT or Elite - Wilcom wants $2600 for an educational institution - PER SEAT.
−
* [https://www.embroidery.com/help.ec?docid=225 File Formats list] - Looks like Barudan added .DST file support at some point, need to confirm BENT can take .DST vs. the Barudan specific .FMC
+
* [http://embrilliance.com/ Embrilliance] (used by Tiffany & Mike Smith) for windows & mac can output .DST files, but not .FMC files (quick scan of website). Embrilliance does not seem to have serial port support. [http://embrilliance.com/demonstration-versions Demo Version Downloads]
−
* [http://embrilliance.com/ Embrilliance] (used by Tiffany & Mike Smith) for mac can output .DST files, but not .FMC files (quick scan of website). Embrilliance does not seem to have serial port support.
+
* [http://www.stitchbuddy.de/mac/ StitchBuddy for Mac] (and ios) - for editing existing designs
 +
* [https://code.google.com/archive/p/pyembroidery/source/default/source Python Embroidery Code]
 +
* Barudan requires color change at beginning of file, is a setting in Wilcom [https://www.wilcom.com/en-us/gethelp/support/faqs/thefirstcolourchangeismissingonmymachine.aspx Barudan Color change missing] - We've seen this behavior on some files we've created and wondered why
 +
 
 +
=Embroidery Design=
 +
*[http://lynniepinnie.com/Good_Design.htm Anatomy of a Quality Embroidery Design] - Cute Zebra example with output from various software
  
 
= Resources =  
 
= Resources =  
Line 65: Line 87:
 
*[http://www.barudanamerica.com/assets/files/advantage-cap-frame-parts_r2.pdf Advantage Cap Frame] - Need to verify model of cap frame\
 
*[http://www.barudanamerica.com/assets/files/advantage-cap-frame-parts_r2.pdf Advantage Cap Frame] - Need to verify model of cap frame\
 
*[http://madeirausa.com/technicians Technicians] - Several listed in Orlando
 
*[http://madeirausa.com/technicians Technicians] - Several listed in Orlando
 +
*[http://www.fcslabs.com/barudan%20page.htm Barudan Board Repair]
  
 
= Internal Parts =  
 
= Internal Parts =  
Line 79: Line 102:
 
*Parity=None
 
*Parity=None
 
*Handshaking=Embroidery Machine
 
*Handshaking=Embroidery Machine
 +
 +
=DST File Format Specs=
 +
[http://www.achatina.de/sewing/main/TECHNICL.HTM DST File Format]

Latest revision as of 23:42, 16 August 2018

edit 

REMEMBER To Reserve Time!

Various tools such as the lasers (Epilog or Audrey), 3D Printers, and Forest CNC need to be reserved before using the tool. Review the Slack channel for the tool to reserve time.

Overview

The Barudan BENT-ZQ-201U "Elite" is a 15 needle single head professional embroidery machine - this means you can have 15 colors in a design without stopping to change thread colors - but only do one garment, hat, etc. at a time. (Barudan also makes multiple head machines that can embroider multiple pieces of art at the same time)

  • When we called shopBarudan, they pronounce the name BEAR - EWW - DAN
  • BENT designates the electronics - series and model of the machine - The BENT has a built-in driver box and a monochrome graphic LCD "automat"
  • ZQ is the head style designator ZQ is a 15 needle inline geometry with individual takeup
  • 201 indicates this model has a ositive Drive presser foot lift mechanism"
  • U is an option code for the "Under-thread Sensor Mechanism" or UTSM. This sensor detects thread breaks and stops stitching.
  • This model is also sometimes called "Tanto"
  • These machines were manufactured between 1997 and 2003
  • Reference - Barudan Model Decoder (PDF)
  • Our photo album for the Barudan Elite on Flickr

An example of the BENT-ZQ-201U

An example of the BENT-ZQ-201U

Current State

  • We've verified that the machine functions, and can embroider. (YAY!!) All 15 needles are currently operational. About half of the thread break sensors are not detecting breaks. If a thread breaks while stitching the machine may continue to stitch without thread. Thread breaks are fairly common for various reasons (on any embroidery machine). So, do not leave the machine unattended as you may end up with a project that is only hole-punched.
  • The cap frame has been verified as functional! :)
  • Software available is Embrilliance on the embroidery computer. Demo versions can be downloaded for practice and learning that are fully functional but will not save. Embrilliance Demo

Items to Fix or Purchase

  • Ribbon Cable mounting to head - Barudan sells a clip that holds the cable to the back of the head for $5ish
  • Broken - Barudan LA250051 Head Cover HQ (LA200051) - $45.88
  • Broken - Barudan P732014 Cover (E-stop) - Pic - (P732014) - $36.90
  • Plastics are yellowed - Retr0bright might be a good project to restore the color
  • Thread break sensors - Need help from someone good with electronics. Contact Lucy.


Completed Items

  • Graphic LCD (Hitachi LMG6911RPBC-00T (specs) was not working due to a bad -24 inverter power supply. Neil made a small PS board and mounted it inside the electronic chassis. Pic 1 Pic 2 Pic 3
  • Needle Change Errors - The machine needed a full degreasing, cleaning and lubrication. We'd purchased stepper motor drivers in the event they needed to be replaced, they will now be stored as parts. MTD2001 - Replacement ordered (qty 2). Datasheet
  • Lithium battery - Internal memory is good, the machine had stored stitch files
  • Training CD (NB10035) - Obtained; to be loaded on device to stay near machine
  • Operators Manual (B8300) ordered from shopBarudan on 1/08/2017 - Obtained; will be located with machine; later found the originals (they are older version?) in the bottom of the thread box
  • Replaced - Baruan Needle Clamp Screw (KF230240) - 4 are broken - shopBarudan - $.041 - Ian ordered 20 from SewManyParts, they are now in the parts bin.
  • Helpful - Thread Tension Gauge (top thread) - Allstitch embroidery - $19.75 - received
  • Helpful - Bobbin Tension Gauge - Amazon - $54.95 - received
  • Fixed- Tension Post Sensor Wheels (HT240290) are cracking / broken. Ian ordered a new set (18) from China. AliExpress - Tension Post Sensor Wheel HT240290 for Barudan embroidery - The parts have arrived, but it is a good bit of work to replace them, so we are going to keep moving for now, then do a teardown at a later date. At the moment only needle #15 is broken beyond use.
  • Tension spring #4 warped - Spring item #HT240094 ordered and replaced.

Parts

Consumables

  • There is a box of L-sized pre-wound white thread bobbins with the machine (they are marked L-120) Pic
  • There is a box of various embroidery thread cones with the machine Pic
  • There is a box of various embroidery backing with the machine Pic
  • Bobbin Cases - These break occasionally, need to keep some on-hand. Amazon Roughly $28 for 6.

To Research

Floppy Drive Replacement

  • Gotek brand drive - Purchased, but have not decided to install - Amazon link
  • Flashfloppy - better software for the gotek drives.

Software Support

  • The Barudan Elite can consume the industry-standard .DST format (which does NOT have needle assignment), as well as the .UXY format (in the form of files named with .U01, .U02, etc.) which does support needle assignment.
  • Barudan TES - Full embroidery design software from Barudan. We have an older copy of TES 2.0 that is running on an old Windows XP laptop. It is functional and can serial transfer to the embroidery machine. (Could be good for reverse engineering the protocol)
  • Embird support for Barudan serial transfer - Embird cable wiring (Embird has been emailed to inquire about non-profit pricing)
  • Wilcom - Serial Connection - Note that the "Tanto" designation is used here instead of BENT or Elite - Wilcom wants $2600 for an educational institution - PER SEAT.
  • Embrilliance (used by Tiffany & Mike Smith) for windows & mac can output .DST files, but not .FMC files (quick scan of website). Embrilliance does not seem to have serial port support. Demo Version Downloads
  • StitchBuddy for Mac (and ios) - for editing existing designs
  • Python Embroidery Code
  • Barudan requires color change at beginning of file, is a setting in Wilcom Barudan Color change missing - We've seen this behavior on some files we've created and wondered why

Embroidery Design

Resources

Internal Parts

Serial Communication Specs

These specs come from the Wilcom Serial Support page

  • Protocol=Standard Serial
  • Baud=9600, or 38400
  • Data bits=8
  • Stop bits=1
  • Parity=None
  • Handshaking=Embroidery Machine

DST File Format Specs

DST File Format

Retrieved from "https://wiki.makerfx.org/index.php?title=Barudan_BENT-ZQ-201U_Embroidery_Machine&oldid=2353"