Difference between revisions of "Forest CNC Shutdown"
| Line 21: | Line 21: | ||
* The machine will automatically move the gantry to the machine home position. | * The machine will automatically move the gantry to the machine home position. | ||
| background-color: white;" | | | background-color: white;" | | ||
| − | [[File:CNC_F10_Shutdown.png| | + | [[File:CNC_F10_Shutdown.png|800px|left]] |
| − | [[File:CNC_F1_Park.png| | + | [[File:CNC_F1_Park.png|800px|left]] |
|- | |- | ||
| Line 32: | Line 32: | ||
* Press the RED button on the silver CNC controller mounted to the frame | * Press the RED button on the silver CNC controller mounted to the frame | ||
| background-color: white;" | | | background-color: white;" | | ||
| − | [[File:CNC_F2_Power_Off.png| | + | [[File:CNC_F2_Power_Off.png|800px|left]] |
Revision as of 19:53, 10 February 2021
edit
REMEMBER To Reserve Time!
Various tools such as the lasers, 3D Printers, and Forest CNC need to be reserved before using the tool. There is a link on each tool's wiki page, and in each tool's Slack channel to reserve time, or you can select the tool from the MakerFX PickTime page
Note: As of March 2025, we are implementing PickTime tool by tool - review the Slack channel for each tool for current status.
Follow these instructions when you are finished using the CNC.
|
Steps
|
Visual
|
1. Park Gantry
|
  |
2. Power Off
|
|
SUCCESS
|
