Difference between revisions of "Forest CNC Run Job"

From MakerFX Wiki!
Jump to: navigation, search
Line 22: Line 22:
 
* Click '''GRAPH (F8)''' to get a visual representation of what the machine will do
 
* Click '''GRAPH (F8)''' to get a visual representation of what the machine will do
 
* Click '''ZOOM ALL (F9)''' to zoom out and see the full job if your job is large such as cutting on a 4x8 sheet
 
* Click '''ZOOM ALL (F9)''' to zoom out and see the full job if your job is large such as cutting on a 4x8 sheet
−
* In the top left corner of the blue application you will see '''T=[number]'''.  This is an estimate of how long your job will take.
 
 
|[[File:CNC_F2_Load.png|800px|left]]
 
|[[File:CNC_F2_Load.png|800px|left]]
 
[[File:CNC_F8_Graph.png|800px|left]]
 
[[File:CNC_F8_Graph.png|800px|left]]
Line 29: Line 28:
 
|- style="vertical-align:top;"
 
|- style="vertical-align:top;"
 
|
 
|
−
=== 2. Run Job ===
+
=== 2. Confirm Job ===
 +
* In the top left corner of the blue application you will see '''T=[number]'''.  This is an estimate of how long your job will take.
 +
|[[File:CNC_Load_Job_Time.png|600px|left]]
 +
 
 +
|- style="vertical-align:top;"
 +
|
 +
=== 3. Run Job ===
  
 
* Put on '''hearing protection'''
 
* Put on '''hearing protection'''

Revision as of 21:12, 10 February 2021

edit 

WARNING!!!

NEVER leave the CNC machine unattended while the spindle is running. Use the emergency stop buttons if you need to stop the machine is causing damage or harm.

After your material is in place and you have set the appropriate home position, you can start a job

Steps

Visual

1. Load Job

  • This step will be to load the actual g-code file created by VCarve Pro
  • Click LOAD (F2)
  • Click GRAPH (F8) to get a visual representation of what the machine will do
  • Click ZOOM ALL (F9) to zoom out and see the full job if your job is large such as cutting on a 4x8 sheet
CNC F2 Load.png
CNC F8 Graph.png
CNC F9 Zoom All.png

2. Confirm Job

  • In the top left corner of the blue application you will see T=[number]. This is an estimate of how long your job will take.
CNC Load Job Time.png

3. Run Job

  • Put on hearing protection
  • Start Laguna dust collection
  • Press ESCAPE a few times to confirm you are at the main menu
  • Click RUN (F4)
  • Click CYCLE START and the machine will start making noise
CNC F4 Run.png

3. Job Running

  • Observe job in operation

SUCCESS

  • Turn off dust collection
  • Using CNC Controls, click Z+ to move the bit away from your material and then X and Y controls to move the gantry away from your material
  • Use secondary dust collection to remove any remaining dust / chips that the Laguna did not suck up
Retrieved from "https://wiki.makerfx.org/index.php?title=Forest_CNC_Run_Job&oldid=3061"