Difference between revisions of "Deltamaker 2"
| Line 46: | Line 46: | ||
|- | |- | ||
| − | | deltamaker-0197 | + | | |
| − | | deltamaker-0187 | + | === deltamaker-0197 === |
| + | | | ||
| + | === deltamaker-0187 === | ||
|- | |- | ||
Revision as of 19:50, 28 July 2018
edit
NOTICE!
PLA only! No PETG or ABS
Local Source for PLA (Get MakerFX discount code from zone manager)
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
| Step | Text Instructions | Video Instructions |
| 1 | Calibration | Need volunteer! |
| 2 | Setting nozzle height | Need volunteer! |
| 3 | Instructions if you need to unload filament | Need volunteer! |
| 4 | Loading filament | Need volunteer! |
| 5 | Preparing to print | Need volunteer! |
DeltaMaker Printers
deltamaker-0197 |
deltamaker-0187 |
 |
|
| http://192.168.1.98 | http://192.168.1.204 |
Consumables
- Tape
- sandpaper
- Purple Disappearing Glue Stick
Information
