Difference between revisions of "Deltamaker 2"
| Line 1: | Line 1: | ||
{{Box-round|title=NOTICE!| | {{Box-round|title=NOTICE!| | ||
| − | === PLA only! No PETG or ABS | + | === PLA only! No PETG or ABS / [https://www.deltamaker.com/collections/filament Local Source for PLA] (Get MakerFX discount code from zone manager) === |
| − | |||
}} | }} | ||
Revision as of 19:59, 28 July 2018
edit
NOTICE!
PLA only! No PETG or ABS / Local Source for PLA (Get MakerFX discount code from zone manager)
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
| Step | Text Instructions | Video Instructions |
| 1 | Calibration | Need volunteer! |
| 2 | Setting nozzle height | Need volunteer! |
| 3 | Instructions if you need to unload filament | Need volunteer! |
| 4 | Loading filament | Need volunteer! |
| 5 | Preparing to print | Need volunteer! |
DeltaMaker Printers
deltamaker-0197 |
deltamaker-0187 |
 |
|
| http://192.168.1.98 | http://192.168.1.204 |
| 240mm hexagon x 260 mm | 240mm hexagon x 260 mm |
| Heated Bed = NO | Heated Bed = NO |
| Nozzle = 0.40 | Nozzle = 0.40 |
Consumables
- Tape
- Sandpaper (80 grit)
- Purple Disappearing Glue Stick
Information
