Difference between revisions of "Forest CNC Shutdown"
(Created page with "Follow these instructions when you are finished using the CNC. === 1. Park Gantry === * Confirm you are on the main menu * Click '''SHUTDOWN (F10)''' * Click '''PARK (F1)'''...") |
|||
| Line 1: | Line 1: | ||
| + | {{MFXReserveToolTime}} | ||
Follow these instructions when you are finished using the CNC. | Follow these instructions when you are finished using the CNC. | ||
| + | {| class="wikitable" style="width: 85%;" | ||
| + | |- | ||
| + | | | ||
| + | ''' | ||
| + | === Steps === | ||
| + | ''' | ||
| + | | | ||
| + | ''' | ||
| + | === Visual === | ||
| + | ''' | ||
| + | |||
| + | |- | ||
| + | |style="width: 50%"| | ||
=== 1. Park Gantry === | === 1. Park Gantry === | ||
* Confirm you are on the main menu | * Confirm you are on the main menu | ||
| Line 6: | Line 20: | ||
* Click '''PARK (F1)''' | * Click '''PARK (F1)''' | ||
* The machine will automatically move the gantry to the machine home position. | * The machine will automatically move the gantry to the machine home position. | ||
| + | | | ||
| + | |- | ||
| + | | | ||
=== 2. Power Off === | === 2. Power Off === | ||
* Make sure that you have parked the CNC using the steps above | * Make sure that you have parked the CNC using the steps above | ||
| Line 12: | Line 29: | ||
* This initiates a shutdown of Windows and the laptop will shutdown | * This initiates a shutdown of Windows and the laptop will shutdown | ||
* Press the RED button on the silver CNC controller mounted to the frame | * Press the RED button on the silver CNC controller mounted to the frame | ||
| + | | | ||
| + | |- | ||
| + | | | ||
=== SUCCESS === | === SUCCESS === | ||
* Please make sure you have used dust collection methods to cleanup on, around and under the CNC | * Please make sure you have used dust collection methods to cleanup on, around and under the CNC | ||
| + | | | ||
| + | |||
| + | |} | ||
Revision as of 19:25, 10 February 2021
edit
REMEMBER To Reserve Time!
Various tools such as the lasers, 3D Printers, and Forest CNC need to be reserved before using the tool. There is a link on each tool's wiki page, and in each tool's Slack channel to reserve time, or you can select the tool from the MakerFX PickTime page
Note: As of March 2025, we are implementing PickTime tool by tool - review the Slack channel for each tool for current status.
Follow these instructions when you are finished using the CNC.
|
Steps
|
Visual
|
1. Park Gantry
|
|
2. Power Off
|
|
SUCCESS
|
