Difference between revisions of "Epilog Speed and Power Settings"

Revision as of 16:32, 21 February 2021

MakerFX updated settings for the Epilog laser.

Material	300 DPI Raster Engraving	400 DPI Raster Engraving	600 DPI Raster Engraving	Vector Cutting
PVC Plastics	NEVER	NEVER	NEVER	NEVER
Vinyl	NEVER	NEVER	NEVER	NEVER

Wood	300/100	50/100	70/100	1/8" (3mm) 30/80/500 1/4" (6mm) 10/100/500 3/8" (10mm) 6/100/500 (may require multiple passes) DO NOT CUT more than 3/8" wood
Acrylic	100/50	100/40	100/35	1/8" (3mm) 15/100/5000 1/4" (6mm) 8/100/5000 3/8" (10mm) 3/100/5000 (may require multiple passes) DO NOT CUT more than 3/8" acrylic
Mat board	100/65	100/55	100/45	50/50/500
Leather	100/50	100/40	100/40	1/8” (3mm) - 50/80/500
Cork	90/40	RESEARCH	RESEARCH	1/8" (3mm) 30/80/500 DO NOT CUT more than 1/8" cork
Paper / Card stock	N/A	N/A	N/A	RESEARCH
Cloth	N/A	N/A	N/A	RESEARCH
Cardboard	N/A	N/A	N/A	50/80/2500 Watch for FIRE!!!
Glass	30/100	40/100	50/100	NEVER
Stone, Marble, Granite, Soapstone, Onyx	20/100	40/100	60/100	NEVER
Anodized Aluminum	100/60	100/50	100/40	NEVER
CerMark on Metal (laser marking ink)	100/40	100/35	100/30	NEVER

@@ Line 72: / Line 72: @@
 |*RESEARCH*
 |*RESEARCH*
-|'''<span style="color:red">NEVER</span>'''
+|
+*1/8" (3mm) 30/80/500
+*'''<span style="color:red">DO NOT CUT more than 1/8" cork</span>'''
 |- style="vertical-align:top;"
-|style="width: 15%" |'''Paper'''
+|style="width: 15%" |'''Paper / Card stock'''
 |N/A
 |N/A
@@ Line 94: / Line 96: @@
 |N/A
 |50/80/2500
+*'''<span style="color:red">Watch for FIRE!!!</span>'''
 |- style="vertical-align:top;"
@@ Line 103: / Line 106: @@
 |- style="vertical-align:top;"
-|style="width: 15%" |'''Marble'''
+|style="width: 15%" |'''Stone, Marble, Granite, Soapstone, Onyx'''
 |20/100
 |40/100