Difference between revisions of "Prazi SD300 Mini Lathe"

From MakerFX Wiki!
Jump to: navigation, search
Line 14: Line 14:
  
 
Current Machine State is out of commission. Currently waiting for parts to replace the chuck and other small misc items. Powerfeed is inoperable as well, will require a DIY solution.
 
Current Machine State is out of commission. Currently waiting for parts to replace the chuck and other small misc items. Powerfeed is inoperable as well, will require a DIY solution.
 +
 +
=Items Needed to Refurb the Lathe=
 +
<li> New Chuck, considering 4" </li>
 +
<li> Tail stock and drill chuck </li>
 +
<li> 1MT reamer to clean tail stock bore </li>
 +
<li> Quick change tool holder </li>
 +
<li> home-brew power feed solution or source oem parts to fix the power feed </li>

Revision as of 20:27, 10 January 2018

Location: MetalWorking Zone

Point Of Contact @joe.gravelle on Slack or by e-mail at Joseph.Gravelle@Gmail.com
Prazi SD300 Mini Lathe Stock Photo


General Policies for the Prazi SD300 Mini Lathe

  • Membership Form must be filled out
  • Member must be cleared on all safety and machine operation
  • Bring your own tooling and materials

  • Information

    Current Machine State is out of commission. Currently waiting for parts to replace the chuck and other small misc items. Powerfeed is inoperable as well, will require a DIY solution.

    Items Needed to Refurb the Lathe

  • New Chuck, considering 4"
  • Tail stock and drill chuck
  • 1MT reamer to clean tail stock bore
  • Quick change tool holder
  • home-brew power feed solution or source oem parts to fix the power feed