CNC Zone

edit 

REMEMBER To Reserve Time!

Various tools such as the lasers (Epilog or Audrey), 3D Printers, and Forest CNC need to be reserved before using the tool. Review the Slack channel for the tool to reserve time.

• All 3D Printers (channel: mfx-3d-printing)
• Laser Epilog (channel: mfx-laser-epilog)
• Laser Audrey (channel: mfx-laser-audrey)
• Laser Boss 1630 aka Bruce (channel: mfx-laser-boss-1630)
• Forest CNC (channel: mfx-cnc)

General Policies for the CNC Zone

The use of the X-Carve CNC machine at MakerFX is limited to only those individuals who:

1. Have attended a training class
2. Been certified to use the machine
3. Take the necessary safety precautions such as wearing close toed shoes, safety glasses and snug fitting clothing.

This machine can be dangerous if used improperly resulting in serious bodily injury or damage to the machine. Minors are prohibited from using the X-Carve CNC without the supervision of a trained and certified MakerFX member.

Step 1: Design	Step 2: Create G-Code	Step 3: Use the X-Carve
300px	300px
V-Carve Tutorial V-Carve Inlay Technique		X-Carve 1000mm CNC Router

Learning The Basics

• What is a vector?

Maintenance

• Routine Maintenance Schedule
• Maintenance Log

---

Go to the Main Page

CNC Tips and Tricks