Composite Stapler

MakerFX has a Composite Stapler. This specialized stapler is only for use with composite nails. The staples are designed to quickly, easily, and safely attach material to the CNC spoil board. This stapler makes the process of securing material much easier. Metal attachment is not to be used as it shorten the light of the spoil board, as well as being an unwelcome item when others are using the CNC system,.. Not every material will be able to be stapled directly. If you are using one of those materials, use a piece of wood to hold the material and then staple the wood down. Another option is to use the bench dog holes.

Steps	Visual
The composite stapler is located in the cabinet to the left of the miter saw station.
It is stored in its original box, please keep the box in good condition until we replace it.
The composite staples are also stored in the same box. The stapler and the staples are used together. Do not mix and match items, it is a matched pair designed to work together.
The staples are loaded from the rear of the stapler. Pull the slide on the side of the stapler back until it locks into place. Then load the staples through the slot in the rear and release the slide.
Connect the stapler to the air system. There is an outlet and pressure control on the wall next to the CNC machine. Remember you have loaded and powered something that shoots projectiles at high speed. Consider it loaded and dangerous at all times.
Typically 70PSI (pounds per square inch) will be the proper amount to seat the staple correctly. Do not adjust the pressure until after you have made a test staple. 70PSI seems to work well with multiple materials including hardwoods. You adjust the level with the black knob on the top of the gauge.
Placeholder Text about using stapler
Placeholder Text about removing material
Text	Picture
Text	Picture