Location: MetalWorking Zone
Point Of Contact @joe.gravelle on Slack or by e-mail at Joseph.Gravelle@Gmail.com
Prazi SD300 Mini Lathe Stock Photo
General Policies for the Prazi SD300 Mini Lathe
Membership Form must be filled out
Member must be cleared on all safety and machine operation
Bring your own tooling and materials
Information
Current Machine State is out of commission. Currently waiting for parts to replace the chuck and other small misc items. Powerfeed is inoperable as well, will require a DIY solution.
Lathe Safety
if you are unsure of how to use the machine, do not use it please
Tie back long hair, roll up long sleeves, remove any bracelets or jewelry from wrists and neck
Wear Safety Glasses At All Times, this is not a suggestion, it is law
Items Needed to Refurb the Lathe
New Chuck, considering 4"
Tail stock and drill chuck
1MT reamer to clean tail stock bore
Quick change tool holder
home-brew power feed solution or source oem parts to fix the power feed
Tooling and Consumables
Helpful Tutorials / Resources
