Deltamaker 2
edit
NOTICE!
PLA only! No PETG or ABS
Local Source for PLA (Get MakerFX discount code from zone manager)
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
Step | Text Instructions | Video Instructions |
1 | Calibration | Need volunteer! |
2 | Setting nozzle height | Need volunteer! |
3 | Instructions if you need to unload filament | Need volunteer! |
4 | Loading filament | Need volunteer! |
5 | Preparing to print | Need volunteer! |
DeltaMaker Printers
deltamaker-0197 |
deltamaker-0187 |
http://192.168.1.98 | http://192.168.1.204 |
Consumables
- Tape
- sandpaper
- Purple Disappearing Glue Stick
Information