Monoprice 3D Printers
edit
NOTICE!
No ABS! Recommend PLA. Contact 3D Printing Point-of-Contact for assistance with PETG
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
| Step | Text Instructions | Video Instructions |
| 1 | TODO: Setting nozzle height | Need volunteer! |
| 2 | TODO: Instructions if you need to unload filament | Need volunteer! |
| 3 | TODO: Loading filament | Need volunteer! |
Monoprice Printers at MakerFX
The Creality printers DO NOT have Octoprint (yet). Use Simplify3D on the 3D Printing PC to slice your object and manually copy to SD card.
Maker Select V2 |
 |
| Slicing=Simplify3D |
| 200mm x 200mm x 180mm |
| Heated Bed = Yes |
| Nozzle = 0.40 |
Consumables
- Tape
- Purple Disappearing Glue Stick
