Downloading and installing instructions for V-Carve Makerspace Edition

From MakerFX Wiki!
Revision as of 13:40, 6 August 2018 by Jeff (talk | contribs)
Jump to: navigation, search

The VCarve Makerspace Edition will only work with the MakerFX X-Carve CNC Router

Go to the VCarve download page and click on the green VCarve Pro Download Trial Software button. Follow the instruction for installing the software.

VCarve Pro only supports Windows operating systems. So if you are a Mac user you will need to run Windows as a VM to use this software on a personal device.

The MakerFX makerspace ID is 5BDD9-50708-F5791-20154-7E971-8FDCE-DAD79. Highlight and copy this ID to the clipboard.

Help/About menu


Navigate to the Help menu and click on About at the top left of the VCarve program.

Retrieved from "https://wiki.makerfx.org/index.php?title=Downloading_and_installing_instructions_for_V-Carve_Makerspace_Edition&oldid=1638"