Maslow 4x8' CNC Router

From MakerFX Wiki!
Revision as of 14:32, 8 December 2019 by Drswando (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

IMG_20171114_141507833_HDR.jpg


Maslow Settings:

  • WebMCP (Debug): 192.168.1.212:5000
  • WebControl: 192.168.1.212:5001

WebControl is a web-based version of Ground Control primarily designed to run on a Raspberry Pi in a headless environment (headless meaning no screen/keyboard attached). There are two separate programs, WebMCP is a sort of watchdog/control program that allows you to stop, start and update the actual WebControl program. WebMCP can be reached on port 5001 and after you start WebControl from that screen, you can reach WebControl on port 5000.

Ground Control Alternate

http://maslowcommunitygarden.org/GroundControl.html?instructions=true

Calibration

  • offset height: 450.85
  • dist w motor: 3002.77
  • sled to cutter: 139
Retrieved from "https://wiki.makerfx.org/index.php?title=Maslow_4x8%27_CNC_Router&oldid=2847"