Epilog Speed and Power Settings

From MakerFX Wiki!
Revision as of 16:03, 21 February 2021 by Jeff (talk | contribs)
Jump to: navigation, search

MakerFX updated settings for the Epilog laser.

Material 300 DPI Raster Engraving 400 DPI Raster Engraving 600 DPI Raster Engraving Vector Cutting
Wood 300/100 50/100 70/100
  • 1/8" (3mm) 30/80/500
  • 1/4" (6mm) 10/100/500
  • 3/8" (10mm) 6/100/500 (may require multiple passes)
  • DO NOT CUT more than 3/8" wood
Acrylic 100/50 100/40 100/35
  • 1/8" (3mm) 15/100/5000
  • 1/4" (6mm) 8/100/5000
  • 3/8" (10mm) 3/100/5000 (may require multiple passes)
Mat board 100/65 100/55 100/45 50/50/500
Leather 100/50 100/40 100/40
  • 1/8” (3mm) - 50/80/500
Glass 30/100 40/100 50/100 NEVER
Marble 20/100 40/100 60/100 NEVER
Retrieved from "https://wiki.makerfx.org/index.php?title=Epilog_Speed_and_Power_Settings&oldid=3159"