Epilog Speed and Power Settings

From MakerFX Wiki!
Revision as of 16:37, 21 February 2021 by Jeff (talk | contribs)
Jump to: navigation, search

MakerFX updated settings for the Epilog laser.

Material 300 DPI Raster Engraving 400 DPI Raster Engraving 600 DPI Raster Engraving Vector Cutting
PVC Plastics NEVER NEVER NEVER NEVER
Vinyl NEVER NEVER NEVER NEVER
Wood 300/100 50/100 70/100
  • 1/8" (3mm) 30/80/500
  • 1/4" (6mm) 10/100/500
  • 3/8" (10mm) 6/100/500 (may require multiple passes)
  • DO NOT CUT more than 3/8" wood
Acrylic 100/50 100/40 100/35
  • 1/8" (3mm) 15/100/5000
  • 1/4" (6mm) 8/100/5000
  • 3/8" (10mm) 3/100/5000 (may require multiple passes)
  • DO NOT CUT more than 3/8" acrylic
Mat board 100/65 100/55 100/45 50/50/500
Leather 100/50 100/40 100/40
  • 1/8” (3mm) - 50/80/500
Cork 90/40 *RESEARCH* *RESEARCH*
  • 1/8" (3mm) 30/80/500
  • DO NOT CUT more than 1/8" cork
Paper / Card stock N/A N/A N/A *RESEARCH*
  • Watch for FIRE!!!
Cloth N/A N/A N/A *RESEARCH*
Cardboard N/A N/A N/A 50/80/2500
  • Watch for FIRE!!!
Glass 30/100 40/100 50/100 NEVER
Stone, Marble, Granite, Soapstone, Onyx 20/100 40/100 60/100 NEVER
Anodized Aluminum 100/60 100/50 100/40 NEVER
CerMark on Metal

(laser marking ink)

100/40 100/35 100/30 NEVER
Retrieved from "https://wiki.makerfx.org/index.php?title=Epilog_Speed_and_Power_Settings&oldid=3170"