Boss Laser LS 1630 / 105 Watt

edit 

REMEMBER To Reserve Time!

Various tools such as the lasers (Epilog or Audrey), 3D Printers, and Forest CNC need to be reserved before using the tool. Review the Slack channel for the tool to reserve time.

• All 3D Printers (channel: mfx-3d-printing)
• Laser Epilog (channel: mfx-laser-epilog)
• Laser Audrey (channel: mfx-laser-audrey)
• Laser Boss 1630 aka Bruce (channel: mfx-laser-boss-1630)
• Forest CNC (channel: mfx-cnc)

edit 

WARNING!

DO NOT cut unknown materials in the laser. Read below for a good list of materials that can be used safely in the laser.

DO NOT USE THE AUTOFOCUS FEATURE. It is known to crash the head on this model.

DO NOT hit Stop and then immediately reset, it will lock the laser and require a reboot.

DO NOT CUT PVC, ANYTHING WITH VINYL, OR UNKNOWN PLASTICS OR FILMS

Laser Zone

Point Of Contact TBD on Slack For laser help, message or tag @laserhelp in the Slack mfx-laser-boss-1630

Overview

Features & Specs

• 105 watt C02 laser tube
• Cutting area: 15.75" X 29.50"
• Doors on all 4 sides to slide longer material in
• Boss Laser LS 1630 Product Page

Software

• Lightburn 2022 to send jobs to laser
• Can still utilize Illustrator or any other vector editing program files through Lightburn
• See mfx-laser-boss-1630 about software

Rules and Use

Setup and Shutdown Procedures

• Setup
  • Turn on chiller and allow it to get to temp.
  • Turn on Laser
  • the rest TBD

• Shutdown
  • Stuff

Useful Links

• Links