CNC Router: FAQ

From MakerFX Wiki!
Revision as of 13:01, 23 August 2022 by BradfordBenn (talk | contribs) (Created page with "There are many questions that come up quite often. These are the Frequently Asked Questions. This is the page for the CNC system. Yes it is a work in process and not yet publi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

There are many questions that come up quite often. These are the Frequently Asked Questions. This is the page for the CNC system. Yes it is a work in process and not yet published. Bradford Aug 23, 2022

The purpose of the certification is to make sure you are knowledgable in how to operate the CNC equipment safely. Most importantly for you, secondarily for the machine. To help with efficiency we ask that people take the main class online first. https://youtu.be/vXbZVdH5exc. There are also other videos online about using VCarve. The wiki also has information ranging from where to get material to the process of starting up and running a job. If there is sufficient need, I will also teach a VCarve Basic class to address any questions or concerns. These questions can also be asked either via Direct Message or Slack posts. I am using this content to create a Frequently Asked Questions page on the Wiki. At least once a month I schedule a hands on certification session. These are one on one and designed to be done in about 30 minutes. As @a_rudolph alluded to, there are no more sessions scheduled for this month [August 2022]. I will soon be scheduling for September.

Retrieved from "https://wiki.makerfx.org/index.php?title=CNC_Router:_FAQ&oldid=3359"