How to Change or Refill the Bobbin
Revision as of 21:55, 3 March 2023 by Carol M Franklin (talk | contribs)
You will find a box of pre-wound bobbins on the Bobbin Stand itself or on the storage shelf. If there are fewer than 10 bobbins in this box, please let the PoC know so that more may be ordered. Please do not use bobbins that were not purchased pre-wound on the Barudan.
Contents
- 1 Step 1: Check to be sure that there is no dust or thread inside the shaft of the bobbin book assembly.
- 2 Step 2: Hold the bobbin case with the front side down and the opening closest to your body.
- 3 Step 3: Place the bobbin into the case with the thread coming off to the right
- 4 Step 4: Drop the bobbin into the bobbin case
- 5 Step 5: Bring the thread through the slit in the edge of the bobbin and under the lever until it comes out the opening.
Step 1: Check to be sure that there is no dust or thread inside the shaft of the bobbin book assembly.
Step 2: Hold the bobbin case with the front side down and the opening closest to your body.
Step 3: Place the bobbin into the case with the thread coming off to the right
(Thread will be unwinding clockwise, or "making a 'q'")
Step 4: Drop the bobbin into the bobbin case
Step 5: Bring the thread through the slit in the edge of the bobbin and under the lever until it comes out the opening.
