Deltamaker 2

From MakerFX Wiki!
Revision as of 20:59, 28 July 2018 by Jeff (talk | contribs)
Jump to: navigation, search
edit 

NOTICE!

PLA only! No PETG or ABS / Local Source for PLA (Get MakerFX discount code from zone manager)


Pre-Flight Instructions

Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.

Step Text Instructions Video Instructions
1 Calibration Need volunteer!
2 Setting nozzle height Need volunteer!
3 Instructions if you need to unload filament Need volunteer!
4 Loading filament Need volunteer!
5 Preparing to print Need volunteer!


DeltaMaker Printers

deltamaker-0197

deltamaker-0187

Deltamaker.jpg
Deltamaker.jpg
http://192.168.1.98 http://192.168.1.204
240mm hexagon x 260 mm 240mm hexagon x 260 mm
Heated Bed = NO Heated Bed = NO
Nozzle = 0.40 Nozzle = 0.40


Consumables

  • Tape
  • Sandpaper (80 grit)
  • Purple Disappearing Glue Stick


Information


Maintenance


Go to Main Page

Report Dead Links