MakerBot Printers

From MakerFX Wiki!
Jump to: navigation, search
edit 

NOTICE!

MakerBot Replicator 2 added to the 3D printer fleet on 1/12/2019

A member is planning to donate 2 Creator Pros which will add ABS printing capability to the 3D printers at MakerFX


Pre-Flight Instructions

Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.

Step Text Instructions Video Instructions
1 TODO: Calibration Need volunteer!
2 TODO: Setting nozzle height Need volunteer!
3 Instructions if you need to unload filament Need volunteer!
4 Loading filament Need volunteer!
5 Preparing to print Need volunteer!


MakerBot / Flashforge Printers at MakerFX

Walter

Babbage (Coming Soon)

Franklin (Coming Soon)

MakerBot Replicator.jpg
FlashforgeCreatorPro.jpg
FlashforgeCreatorPro.jpg
MakerBot Replicator 2 Flashforge Creator Pro Flashforge Creator Pro
225mm x 148mm x 150mm 225mm x 148mm x 150mm 225mm x 148mm x 150mm
Bed = Glass Bed = PEI, Removable Spring Steel Bed = PEI, Removable Spring Steel
Manual Bed Leveling Manual Bed Leveling Manual Bed Leveling
Heated Bed = Yes Heated Bed = Yes Heated Bed = Yes
Nozzle = 0.40 Nozzle = 0.40 Nozzle = 0.40
ABS = No ABS = Yes ABS = Yes


Consumables

  • Isopropyl Alcohol
  • Acetone
  • Purple Disappearing Glue Stick



Go to Main Page

Report Dead Links