Rabbit Fiber Laser XTL-FP30
To make a reservation: Rabbit Fiber Laser Reservation Link
edit
REMEMBER To Reserve Time!
Various tools such as the lasers, 3D Printers, and Forest CNC need to be reserved before using the tool. There is a link on each tool's wiki page, and in each tool's Slack channel to reserve time, or you can select the tool from the MakerFX PickTime page
Note: As of March 2025, we are implementing PickTime tool by tool - review the Slack channel for each tool for current status.
edit
WARNING!
DO NOT USE ANY MATERIAL OTHER THAN METAL IN THIS LASER
THIS LASER IS DESIGNED FOR ETCHING, NOT CUTTING
DO NOT SET POWER HIGHER THAN 65%
Point Of Contact TBD on Slack For laser help, message or tag @laserhelp in the Slack mfx-laser-rabbit-fiber
Overview
Features & Specs
XTL-FP30 H Series
- Fast marking speed and high efficiency
- High electro-optic conversion efficiency
- Perfect marking effect
- Integrated structure,small and compact size,less occupied area,easy transportation
Dimensions:
- 49.5cm x 53cm x 89cm or 19.5" x 20.86" x 35"
- Work Area: 150mm x 150mm, 110mm x 110mm or 5.9" x 5.9", 4.3" x 4.3"
Weight:
- 120kg or 265lbs.
Wattage:
- 30W
Specifications:
- 110VAC 60Hz
- Raycus Fiber laser source
- Sino Galvanometer Head, 2206 Series
- Singapore "Wavelength" Theta Lens
- Motorized Z Axis
- JCZ Control Board and EZCAD 2.14.10 Software
- Outside Red Pointer
- Protective Glasses
- Foot Pedal
Software
- Lightburn with Galvo add-on to design and send jobs to laser
- See mfx-laser-rabbit-fiber about software
Rules and Use
Setup and Shutdown Procedures
- Shutdown
- Stuff
Useful Links
- Links