Difference between revisions of "Grizzly G0755 Mill"
| (2 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
The headstock tilts 90° left/right and moves in the Z-axis along precision dovetailed ways—with both manual and powered elevation control. The table also features both manual and powered X-axis control, but with a manually-controlled Y-axis. All table movement is along scraped dovetail ways. | The headstock tilts 90° left/right and moves in the Z-axis along precision dovetailed ways—with both manual and powered elevation control. The table also features both manual and powered X-axis control, but with a manually-controlled Y-axis. All table movement is along scraped dovetail ways. | ||
| + | |||
| + | |||
| + | [https://cdn0.grizzly.com/specsheets/g0755_ds.pdf Grizzly G0755 specifications can be found here.] | ||
| + | |||
| + | [https://cdn0.grizzly.com/manuals/g0755_m.pdf Gizzly G0755 owners manual can be found here.] | ||
Latest revision as of 10:13, 26 November 2020
The Model G0755 is a free-standing mill/drill that strikes a great balance between being heavy-duty and high-precision.
The spindle is equipped with precision P5 spindle bearings and is driven by an oil-bath-lubricated and gear-driven headstock. The spindle is fully reversible and features both coarse and fine downfeed controls. The six spindle speeds range from 90–1970 RPM and are controlled by convenient gear-change levers.
The headstock tilts 90° left/right and moves in the Z-axis along precision dovetailed ways—with both manual and powered elevation control. The table also features both manual and powered X-axis control, but with a manually-controlled Y-axis. All table movement is along scraped dovetail ways.
