3D Printing Zone

edit 

REMEMBER To Reserve Time!

Various tools such as the lasers, 3D Printers, and Forest CNC need to be reserved before using the tool. There is a link on each tool's wiki page, and in each tool's Slack channel to reserve time, or you can select the tool from the MakerFX PickTime page

Note: As of March 2025, we are implementing PickTime tool by tool - review the Slack channel for each tool for current status.

How to page for Reservations

Step 1: Get A 3D Model To Print	Step 2: Get Ready To Print	Step 3: Use the 3D Printers
Learn how to design your own objects Learn where you can find objects on the internet Install and Learn Fusion 360	Learn how to "slice" a model and get it ready for printing Skip to Step 3 if you are printing on a DeltaMaker	Learn about 3D printers at MakerFX Learn how to actually print your model Learn about other printers owned by members DeltaMaker page Creality Printers page Monoprice Printers page Flashforge Printers page

---

Go to the Main Page

Report Dead Links