Difference between revisions of "MakerBot Printers"
| Line 77: | Line 77: | ||
| Nozzle = 0.40 | | Nozzle = 0.40 | ||
| Nozzle = 0.40 | | Nozzle = 0.40 | ||
| + | |||
| + | |- | ||
| + | | ABS = No | ||
| + | | ABS = Yes | ||
| + | | ABS = Yes | ||
| + | |||
|} | |} | ||
Revision as of 15:12, 12 January 2019
edit
NOTICE!
A member is planning to donate 2 Creator Pros which will add ABS printing capability to the 3D printers at MakerFX
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
| Step | Text Instructions | Video Instructions |
| 1 | TODO: Calibration | Need volunteer! |
| 2 | TODO: Setting nozzle height | Need volunteer! |
| 3 | Instructions if you need to unload filament | Need volunteer! |
| 4 | Loading filament | Need volunteer! |
| 5 | Preparing to print | Need volunteer! |
MakerBot / Flashforge Printers at MakerFX
To Be Named |
Babbage |
Franklin |
 |
 |
|
| MakerBot Replicator 2 | Flashforge Creator Pro | Flashforge Creator Pro |
| 225mm x 148mm x 150mm | 225mm x 148mm x 150mm | 225mm x 148mm x 150mm |
| Heated Bed = Yes | Heated Bed = Yes | Heated Bed = Yes |
| Nozzle = 0.40 | Nozzle = 0.40 | Nozzle = 0.40 |
| ABS = No | ABS = Yes | ABS = Yes
|
Consumables
- Isopropyl Alcohol
- Acetone
- Purple Disappearing Glue Stick
