Creality 3D Printers
edit
NOTICE!
No ABS! Recommend PLA. Contact 3D Printing Point-of-Contact for assistance with PETG
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
Step | Text Instructions | Video Instructions |
1 | TODO: Setting nozzle height | Setting nozzle height |
2 | TODO: Instructions if you need to unload filament | Need volunteer! |
3 | TODO: Loading filament | Setting nozzle height (9:17 to 9:54) |
Creality Printers at MakerFX
The Creality printers DO NOT have Octoprint (yet). Use Simplify3D on the 3D Printing PC to slice your object and manually copy to SD card.
CR-10 Mini |
Slicing=Simplify3D |
300mm x 220mm x 300mm |
Heated Bed = Yes |
Nozzle = 0.40 |
Consumables
- Hairspray
- Tape
- Purple Disappearing Glue Stick