Jet AFS-1000B Air Filtration System

From MakerFX Wiki!
Revision as of 14:36, 14 July 2017 by Steve (talk | contribs) (Created page with "Location: Wood Zone 200px|thumb|right|Jet AFS-1000B Air Filtration System Use the Media:Jet_AFS-1000B_Air_Fi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Location: Wood Zone

Jet AFS-1000B Air Filtration System

Use the remote control to turn the unit on/off and to adjust the speed.

Policies for the Jet AFS-1000B Air Filtration System

  • The air filtration system must be running anytime any equipment in the Wood Shop is being used.

Information

Videos

Accessories

Consumables

Routine Maintenance

  • There are two filters that need to be changed. The outer filter can easily be removed by disengaging the two clips. Now you can simply pull the filter out, or use a screwdriver to pop the filter out. The inner filter can now be pulled out of the unit. The inner filter can be blown out with compressed air. The filters should be replaced depending on the amount of usage. Clogged filters will reduce the amount of air circulation. There is an arrow indicating the air flow direction on the outer filter. Make sure the filter is inserted facing the proper direction.

Go to The Main Page

Report Dead Links