Creality 3D Printers
edit
NOTICE!
No ABS! Recommend PLA. Contact 3D Printing Point-of-Contact for assistance with PETG
Pre-Flight Instructions
Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.
| Step | Text Instructions | Video Instructions |
| 1 | Setting nozzle height | Setting nozzle height |
| 2 | Instructions if you need to unload filament | Need volunteer! |
| 3 | Loading filament | Setting nozzle height (9:17 to 9:54) |
Creality Printers at MakerFX
CR-10 Mini |
|
| 300mm x 220mm x 300mm |
| Heated Bed = Yes |
| Nozzle = 0.40 |
Consumables
- Hairspray
- Tape
- Purple Disappearing Glue Stick
