3D Printers
edit
REMEMBER To Reserve Time!
Various tools such as the lasers, 3D Printers, and Forest CNC need to be reserved before using the tool. There is a link on each tool's wiki page, and in each tool's Slack channel to reserve time, or you can select the tool from the MakerFX PickTime page
Note: As of March 2025, we are implementing PickTime tool by tool - review the Slack channel for each tool for current status.
Below is the current roster of 3D printers at MakerFX for use by members.
|
Deltamaker 2
|
Creality 3D Printers
|
Monoprice 3D Printers
|
Flashforge 3D Printers
| |
| Printer |  |
 |
 |
 |
| Number of Printers | 4 | 1 | 1 | 2 (Coming Soon!) |
| Print Volume | 240mm hexagon x 260 mm | 300mm x 220mm x 300mm | 200mm x 200mm x 180mm | 225mm x 148mm x 150mm |
| Heated Print Bed | No | Yes | Yes | Yes |
| Materials Supported | PLA Only!!! | PLA
PETG (See Point of Contact) |
PLA | PLA / PETG / ABS |
| ABS? | No | No | No | Yes |
| Availability
(Must Be Logged In) |
*CR-10 Mini | *Monoprice Maker Select V2 |
