NOTICE!

A member is planning to donate 2 Creator Pros which will add ABS printing capability to the 3D printers at MakerFX

Pre-Flight Instructions

Once these steps are completed, they do not need to be completed before each and every print in a given session. They only take a few minutes to complete and it will ensure you have a good experience with the printer.

Step	Text Instructions	Video Instructions
1	TODO: Calibration	Need volunteer!
2	TODO: Setting nozzle height	Need volunteer!
3	Instructions if you need to unload filament	Need volunteer!
4	Loading filament	Need volunteer!
5	Preparing to print	Need volunteer!

MakerBot / Flashforge Printers at MakerFX

To Be Named	Babbage	Franklin

MakerBot Replicator 2	Flashforge Creator Pro	Flashforge Creator Pro
225mm x 148mm x 150mm	225mm x 148mm x 150mm	225mm x 148mm x 150mm
Heated Bed = Yes	Heated Bed = Yes	Heated Bed = Yes
Nozzle = 0.40	Nozzle = 0.40	Nozzle = 0.40