Sawstop 10 inch Professional Cabinet Saw

Location: Wood Zone

SawStop PCS

Point Of Contact @joe.gravelle on Slack

General Policies for the SawStop PCS

If you do not know how to use a table saw please request training, especially with this saw and its special technology. Before using the SawStop you will need to be cleared on its setup and use by Joe

No cutting of conductive materials such as aluminum, wet wood, pressure treated, or otherwise known conductive materials. Cutting these types of materials will trigger the blade brake and destroy the blade.

If you trip the brake on the saw, accidental( flesh to blade contact or the material tripping the brake), please alert the zone POC. You are also responsible for replacing at least the blade if the brake was proven to be tripped by flesh contact, a $50 blade is cheaper than losing a hand. SawStop will replace the brake free of charge if its sent to them after an incident and they find it was tripped by flesh contact.

General Disclaimer

SawStop's Flesh Detection technology cannot stop kickback. If you are unsure of what you are about to do, stop and ask for assistance.

Equipment Features

• Flesh Detecting Technology - [1]
• Mobile Base
• 36" T-Glide Fence
• Overarm Dust Collection
• Dust Collector Blade Guard

Current Collection of Jigs or Special Tools

• Crosscut Sled -> to be made
• Jointing Sled -> to be made
• Push Stick
• MicroJig GRR-Ripper push block [2]

Maintenance

Regular maintenance of the saw is required and will be carried out by the area contact. But after every use please clean any sawdust from the saw, lower the blade, place any tools back to their homes, and turn the saw off (unplug from the wall and store the cord away)

Common Setup Tips: For those interested

• Checking Blade to Miter Slot Parallelism [3]
• Fence to Blade / Miter Slot Parallelism [4]