Difference between revisions of "Forest CNC Startup"

From MakerFX Wiki!
Jump to: navigation, search
m (Reverted edits by BradfordBenn (talk) to last revision by Jeff)
(Tag: Rollback)
Line 68: Line 68:
 
*Machine cycles through X, Y & Z limits
 
*Machine cycles through X, Y & Z limits
 
*X, Y & Z coordinates should all read 0 (zero) - look bottom left of the screen
 
*X, Y & Z coordinates should all read 0 (zero) - look bottom left of the screen
−
*Watch the screen for status messages. At times it will fail if the gantry is parked directly on the limit switches. To fix that issue, lower the Z (spindle) by about an inch, and move X and Y by about an inch. Press '''Reset Home''' again.
+
|[[File:CNC_Startup_Reset_Home.png|500px|left]]
−
|[[File:Forest-Stop1.jpg|180px]] [[File:Forest-Stop2.jpg|180px]] [[File:Forest-Stop3.jpg|180px]] [[File:CNC_Startup_Reset_Home.png|500px|left]]
 
  
  
  
−
|- style="vertical-align:top;"
 
−
|
 
−
=== 7. DUST COLLECTION ===
 
−
Before starting your jobs, check the Laguna dust collection system and prep it for use.
 
−
*Check the main collection bin by either sliding it out or using the view hole and verifying that it is less than 75% full. If it is full, replace it with a clear bag that is typically on top of the Laguna.
 
−
* Sweep the main filter using the handle on the separator section of the Laguna. Push the handle forward and back 10 times. Also check its collection bin.
 
  
  
Line 97: Line 90:
  
 
|}
 
|}
−
 
−
[[Category:CNC Router]]
 

Revision as of 09:42, 14 September 2023

edit 

REMEMBER To Reserve Time!

Various tools such as the lasers (Epilog or Audrey), 3D Printers, and Forest CNC need to be reserved before using the tool. Review the Slack channel for the tool to reserve time.


Follow these steps to startup the CNC from a powered off position.

Steps

Visual

1. Turn on the computer
CNC Laptop Power.png

2. Turn on the CNC controller

  • Press the green button on the silver box mounted to the CNC machine
CNC Controller Power On.png

3. Start Router Control application

  • Double click the Router Control application on the desktop
  • Two applications actually startup...
CNC Router Control App.png

Application - CNC Configuration

  • The first application (Blue background) allows you to initiate functions using the function keys (F1-F10)
CNC App Blue.png

Application - CNC Movement Control

  • The second application (Green background) allows you to control the machine movement. We refer to this as CNC Controls in the remaining instructions.
CNC App Green.png

4. Verify gantry in Parked position

  • If not, using the CNC controls, move the gantry to the other end of the table
  • DO NOT go all the way to the end, but come within a few inches

Gantry should be at the far end of the table away from the computer

5. Set CNC Home: RESET TRIPPED

  • Using the CNC software on the laptop...
  • Click the Big Red Reset button
CNC Reset Tripped.png


6. Set CNC Home: RESET HOME

  • Using the CNC software on the laptop...
  • Press the Reset Home button
  • Machine cycles through X, Y & Z limits
  • X, Y & Z coordinates should all read 0 (zero) - look bottom left of the screen
CNC Startup Reset Home.png




SUCCESS
CNC Machine Home Set.png

Next Step

Click here for the next step

Retrieved from "https://wiki.makerfx.org/index.php?title=Forest_CNC_Startup&oldid=3828"