Forest CNC Startup

From MakerFX Wiki!
Revision as of 20:14, 10 February 2021 by Jeff (talk | contribs)
Jump to: navigation, search
edit 

REMEMBER To Reserve Time!

Various tools such as the lasers (Epilog or Audrey), 3D Printers, and Forest CNC need to be reserved before using the tool. Review the Slack channel for the tool to reserve time.


Follow these steps to startup the CNC from a powered off position.

Steps

Visual

1. Turn on the computer

CNC Laptop Power.png

2. Turn on the CNC controller

  • Press the green button on the silver box mounted to the CNC machine
CNC Controller Power On.png

3. Start Router Control application

  • Double click the Router Control application on the desktop
  • Two applications actually startup.
  • The first application (Blue background) allows you to initiate functions using the function keys (F1-F1)
  • The second application (Green background) allows you to control the machine movement. We refer to this as CNC Controls in the remaining instructions.
CNC Router Control App.png

4. Verify gantry in Parked position

  • Gantry should be at the far end of the table away from the computer ===
  • If not, using the CNC controls, move the gantry to the other end of the table
  • DO NOT go all the way to the end, but come within a few inches

5. Set CNC Home

  • Using the CNC software on the laptop...
  • Click the Big Red Reset button
  • Press the Reset Home button
  • Machine cycles through X, Y & Z limits
  • X, Y & Z coordinates should all read 0 (zero) - look bottom left of the screen

SUCCESS