Wood Zone
Contents
- 1 General Policies for the Wood Zone
- 2 Equipment
- 2.1 SawStop Professional Table Saw
- 2.2 Grizzly Bandsaw
- 2.3 Bosch Axial Glide Mitre Saw
- 2.4 DeWalt Thickness Planer
- 2.5 Rigid Belt / Spindle Sander
- 2.6 Delta Drill Press
- 2.7 DeWALT 715 Chopsaw
- 2.8 14 Inch Cutoff Saw
- 2.9 Laguna C-Flux Dust Collector
- 2.10 Fein Dust Extractor
- 2.11 Oneida Dust Deputy
- 2.12
- 3 Other Equipment
- 4 Consumables
- 5 Maintenance
General Policies for the Wood Zone
- Don't place anything wet such as cold drinks or sweaty hands on cast iron surfaces. This causes them to rust.
- No Metal Cutting, this is non negotiable Do not cut any metal, especially ferrous metal in the woodshop with the WOOD Specific tools and blades. Keep the metal working to the metal working section please. Metal chips / shavings will ruin others wood working projects.
Equipment
Other Equipment
- Craftsman 12 inch Bandsaw-Sander
- Dewalt 20 inch Scroll Saw
- Jet AFS-1000B Air Filtration System
- Delta AP 400 Dust Collector
- X-Carve 1000mm CNC Router
